Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Mortise gauge question

Posts

Mortise gauge question

#1

Mortise gauge question

Tom Norton

In the process of making a gauge but wondering what size the pins should be?

Re: Mortise gauge question

#2

Re: Mortise gauge question

T.M. Stock

You might check your local hobby shop specializing in model aircraft to see what sizes of music wire are available...IMS, K&S 1/16"/0.062" and 5/64"/0.078" would both work well, and are usually stocked in the stores near my shop. Music wire runs Rc 41-60 per ASTM A 228 spec (spring wire aka music wire), but the stock I have seems to be in the low 50's, judging from how it cuts with a file. Stoning the final blade shapes with a hard arkansas slip stone puts a nice edge on.