Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Smashed Knives - what for the handle?

Posts

Smashed Knives - what for the handle?

#1

Smashed Knives - what for the handle?

david weaver

I'm going to squish a few more small things with my convenient indoor setup.

I haven't yet decided on the handle material, yet, any thoughts?

Easy options would be:

* plasti dip (that has to be considered the high class choice - make it look like it came from harbor freight) :b

* buy a roll of rattan

* cotton thread

* athletic tape

* paracord (that's popular, but I have to admit, I really hate the look in the same way that I don't like to wear shirts with popular logos - personality disorder, maybe - everyone else is doing it).

The geometry isn't right for more traditional options like burnt in wood, and I'm not going to grind it down and fit a wooden handle.

Some of the other knives might be squashed O1 stock, so their handle profile will already be thin, and that's a recipe for discomfort.

What's your suggestion, and please limit it to things you've tried if possible.

Re: Smashed Knives - what for the handle?

#2

bridger

Re: Smashed Knives - what for the handle?

Bridger

I wrapped one with copper refrigeration tubing, soldered in place. Looks great, cold in the hand, heavy.

Re: Smashed Knives - what for the handle?

#3

Re: Smashed Knives - what for the handle?

William Duffield

Dumb question: Why can't you use the handle you took off of it when it was a file?

When I feel like being a fancy lad, I drill a hole in a piece of exotic wood, turn the handle and ferrule, and epoxy the blade into it. If I'm making something totally utility, I use hockey stick tape with a three layer ridged wrap.

https://www.youtube.com/watch?v=JDmkSfMfEzc

Re: Smashed Knives - what for the handle?

#4

Re: Smashed Knives - what for the handle?

Patrick Chase

I like Bridger's idea of copper pipe.

I also think that switching to O1 bar stock is a good idea. IMO you're going to have a hard time figuring out and optimizing your processes if you don't know what you're working and how it's *supposed* to behave.

PS - Now might be a good time to read the parts of the Verhoeven book that are relevant to basic metallurgy and HT processes. There's something to be said for understanding why you're doing stuff.

Re: Smashed Knives - what for the handle?

#5

Re: Smashed Knives - what for the handle?

Derek Cohen (in Perth, Australia)

Why a handle, David. Just pretend it is a Kiridashi :)


Regards from Cape Town

Derek

p.s. Happy New Year

Re: Smashed Knives - what for the handle?

#6

Re: Smashed Knives - what for the handle?

david weaver

Patrick - I work with O1. I don't really need to read any texts about steel and heat treating, as I've yet to have an iron that turned out worse than a commercially made iron.

Except one time, the first time I torch tempered, I learned that the object will hit light straw and when you remove it from the flame, it will keep going.

When it counts, the irons are tempered in my oven.

I gambled on the file, because I don't know what it is, but thin sections of water hardening steel will quench fine in oil. They will not quench fine in water without being sandwiched.

I'm not interested in *reading* more at this point. I'm not interested in discussing how similar novaculite is to silica, I'm interested in doing. The internet is full of too much discussion about what text people should read, and too little of people doing things, learning touch and showing what they made.

Re: Smashed Knives - what for the handle?

#7

Re: Smashed Knives - what for the handle?

david weaver

I'm going to make that style of knife sooner or later, and I think I may even try to laminate one (though that's a bit of a tall order).

In this case, I think I might like to use this knife as my recycle bin knife (cutting cardboard), and just want a little bit more diameter. Not so much grip, just diameter.

I'm surprised that so far, it's not easy to just go out to ebay and buy a roll of genuine rattan. There is a roll of rubber synthetic rattan for a princely sum, but I'm sure I could ruin that quickly.

Re: Smashed Knives - what for the handle?

#8

Re: Smashed Knives - what for the handle?

david weaver

That's an interesting concept! It's often cold in my shop, and I might be a bit too much of a wuss to do that, though.

We topped out at 15 degrees today and are looking at about 3 degrees tonight. That puts my shop somewhere in the high 40s, usually.

Re: Smashed Knives - what for the handle?

#9

Re: Smashed Knives - what for the handle?

david weaver

I ground the tang off of the file, so I'm left with file body as a tang. I could probably make a thin wooden handle and drill it out, but the file that is now the handle was hammered/ground and somewhat irregular. I think epoxy would solve that, but it might be a bit garish.

Still surprised that rattan isn't easy to find. For this one knife, it's not important, but I'd like to come up with a solution that I can use again.

My father would've used jute or rawhide strip, but I'm not quite sure about either of those. Glue-soaked rawhide might be interesting, though.

Re: Smashed Knives - what for the handle?

#10

Leather offcuts

Wiley Horne--So. Calif.

Hi David,

This is the beginning of a journey for you, so why not do something that marks it as special. Is there a place anywhere near you that has leather offcuts? Look on John Aniano’s website for his bamboo leaf knife (if it’s still there, under special tools)—you’ll see what I mean.

Wiley

Re: Smashed Knives - what for the handle?

#11

Yeah, this...

John in NM

Either off cuts or thong boot laces - never got the hang of lacing boots with the darn things, so I use them for other purposes (they often come with boots I buy).

If you do any full size knives, like for a belt knife or something, try cork rings for fishing rod handles. I made a fishing knife using a few rings and a Mora blade, came out really cool. Of course I've not gone fishing since (at least not anywhere you would need to gut a fish) so it lives in my desk drawer and cuts electrical tape and plastic optical fiber. Or anything else that needs cutting.

Still a neat handle though :D

Re: Smashed Knives - what for the handle?

#12

Re: Leather offcuts

david weaver

Thanks, Wiley. I've got a bunch of leather on my shelves, including some old shell strops that aren't really going to be usable razor strops - and linens to go with them. I think I might be able to make something of the linens by cutting them into thin strips and gluing their fringes.

I am looking at Jon's site. Unfortunately, I had to go in through a google search to something other than the main page - it looks like some international tennis shoe seller has hijacked Jon's main page.

Re: Smashed Knives - what for the handle?

#13

straight razors...

david weaver

I've probably got a few more than 100 straight razors right now, and some are not suitable for straight razoring (due to lack of care or just being honed to death), but Jon's page has excellent ideas for small knives made from them.

I have held on to them, because I figured they could be cut down to make knives, but I never invested much further thought.

Excellent!

Re: Smashed Knives - what for the handle?

#14

Re: Rattan for the handle?

William Duffield

Sure it is. Lee Valley, Woodcraft, and probably Rockler and Klingspor carry it with their other chair caning supplies.

http://www.leevalley.com/us/wood/page.aspx?cat=1,250,43298,57641&p=57639

Re: Smashed Knives - what for the handle?

#15

bridger

Re: Smashed Knives - what for the handle?

Bridger

How about heat shrink tubing? If you want to bulk up the handle, wrap it with glue soaked twine then heat shrink.

Re: Smashed Knives - what for the handle?

#16

Re: Smashed Knives - what for the handle? *LINK*

Bruce, a MN Galoot

I don’t know if you have enough tang to work with, but you might find some inspiration in this


Cord wrapping

Re: Smashed Knives - what for the handle?

#17

Re: Rattan for the handle?

david weaver

Perfect....thanks. Looks like I was just searching for the wrong word.

Re: Smashed Knives - what for the handle?

#19

Re: Smashed Knives - what for the handle?

Patrick Chase

I think Bridger may have developed a taste for the "industrial look" somewhere along the way.

Seriously, you could do a lot worse than heavyweight heatshrink tubing for ultra-quick and easy hand protection. I'd make sure to get the thick stuff though.

Hey wait, I've got it: Sugru! :-)

Re: Smashed Knives - what for the handle?

#20

Re: In which case ...

Patrick Chase

Nice!

How did you get that "swirly etch" look on the blade?

Re: Smashed Knives - what for the handle?

#21

Kiridashi and other knives

Derek Cohen (in Perth, Australia)

Hi Patrick

While I have made knives like this in the past from old circular saw blades, this particular one is made from a cheap kiridashi. They are plentiful (and cheap) on eBay. I simply added the handle.

I have made from scratch many, many marking knives .. especially ones for detail work such as dovetails. This are more involved. The kiridashi type, however, are simply bars of steel, and even damascus is available very cheaply on eBay as there is little labour involved ...



Of course, there are also very expensive kiridashi knives available, with superior damascus steel and superior edge holding, and made my big names. In practice, for general joinery, I like the Stanley knife that Paul Sellers made popular ...


... while for dovetails I use the knives I designed (and made for a several years) that are now manufactured by Chris Vesper (I have no financial connection) ...

These ones I made ...


Regards from Cape Town

Derek

Re: Smashed Knives - what for the handle?

#22

Re: In which case ...

David weaver

Hi Derek- is the knife seated in a round hole, perhaps filled with epoxy?

If not, how did you slot the handle?

I like it!

Re: Smashed Knives - what for the handle?

#23

Re: In which case ...

Derek Cohen (in Perth, Australia)

Hi David

I formed a tang on the knife by cutting away some of the steel. The handle was drilled, and the top was also slotted. The blade looks from the outside like it is seated in a slot. It was a tight fit, with a little added epoxy.


The rear of the handle has a little brass button where it was indexed on the lathe.


The tapered handle offers much control when bearing down with some weight.


Regards from Cape Town

Derek

Re: Smashed Knives - what for the handle?

#24

Thanks, Derek


Re: Smashed Knives - what for the handle?

#25

Re: Smashed Knives - what for the handle?

david weaver

Thanks, Bruce. I'm not so much interested in cord, but the wrapping patterns on that page are helpful, regardless. Especially the white one - it answers some questions that I had about starting and terminating rattan without having wood to route it into.