Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Bamboo for workbench top?

Posts

Bamboo for workbench top?

#1

Bamboo for workbench top?

Denis Chenard in Ottawa

Around here Lowe's has a sale on bamboo countertops, I could buy one, rip it in four pieces, and make a 3" thick split bench top. Any reasons why I should avoid bamboo? I seem to recall that it can't be planed, which would be a serious impediment to bench top maintenance.

Opinions?

Thnx,

DC

Re: Bamboo for workbench top?

#2

Re: Bamboo for workbench top?

Brian Holcombe

It’s fairly hard on tools.

Re: Bamboo for workbench top?

#3

Re: Bamboo for workbench top?

Patrick Chase

More precisely it contains quite a bit of silicate, which is the predominant abrasive in natural oilstones and JNats.

Carbide cutters do pretty well on it as they're much harder than silicates, but most steels are going to be "challenged".

Re: Bamboo for workbench top?

#4

Re: Bamboo for workbench top?

William Duffield

It's kind of splintery and splits easily. I've had no problem planing it with a forked-tailed apprentice with a carbide helical head, but maintaining it with hand planes would be an issue.

I have a bamboo slide rule which is labeled "non-hygroscopic," which means it does not change dimensions with changes in humidity. However, I would not assume that is true of all bamboo; the property may be due to resin impregnation.