Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Sharpening Japanese Handsaws

Posts

Sharpening Japanese Handsaws

#1

Sharpening Japanese Handsaws

DP

Can someone recommend a place that can sharpen Japanese handsaws? Thanks.

Re: Sharpening Japanese Handsaws

#2

Re: Sharpening Japanese Handsaws

david weaver

Who is or who are the makers of your saws?

I don't know if anyone in the US is doing this for "nice" saws.

Re: Sharpening Japanese Handsaws

#3

Re: Sharpening Japanese Handsaws

DP

I don't know the maker. The saw belongs to my son and I suspect that it was not an expensive one.

Re: Sharpening Japanese Handsaws

#4

Re: Sharpening Japanese Handsaws

david weaver

If the teeth are black (impulse hardened) then he can carefully touch up the facets on them with a diamond japanese saw file, or perhaps a card file on some parts and improve the performance. Otherwise, those are generally intended to be replaced rather than resharpened.

If it is a high quality saw with a hardened sawplate and similar teeth, they're usually sent back to japan to be sharpened and checked over (not cheap, and takes a while).

Re: Sharpening Japanese Handsaws

#5

Re: Sharpening Japanese Handsaws

Brian Holcombe

I haven’t used Mark’s services but you might try Mark Grable.

Re: Sharpening Japanese Handsaws

#6

Re: Sharpening Japanese Handsaws

Patrick Chase

Building on something David alluded to: Inexpensive Japanese saws almost always have impulse-hardened teeth, and realistically can't be sharpened by anything but diamond or CBN. As he says the most you can realistically do is touch one up with a feather-edge diamond hone.

Re: Sharpening Japanese Handsaws

#7

Re: Sharpening Japanese Handsaws

Howard Pollack

I used Mark many years ago. He did a fine job, but I'm not sure he is doing this any longer.

-Howard

Re: Sharpening Japanese Handsaws

#8

Re: Sharpening Japanese Handsaws

DP

Thanks to everyone for your input. I'll pass it on to my son.