Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Wire wheel question

Posts

Wire wheel question

#1

Wire wheel question

Dave (Arlington, VA)

I want to put a wire wheel on my old Craftsman 1750 rpm bench grinder for rusty old tool rehab. It has a 1/2" arbor and the wire wheel I have is has a 3/4" diameter. I tried searching the site for advice but can't get the search function to work (tried several browsers). Anyone with experience making this conversion work? What do I need in order to be able to make this wire wheel work on my bench grinder?

Thanks in advance.

Dave

Re: Wire wheel question

#2

Re: Wire wheel question

david weaver

Do you have a lathe? You can make a bearing or sleeve if you do (presumably the width is a problem for stock bearings?)

Corian is a good bearing material - you can turn it on a lathe. Even if you don't have a lathe, I'll bet you could rig up some kind of friction fit setup to do it on a drill press.

Re: Wire wheel question

#3

Re: Wire wheel question

Dave (Arlington, VA)

Thank you, David. Sadly, no lathe, and no drill press. Strictly hand tools with the exception of a corded drill.

Dave

Re: Wire wheel question

#4

Call a bearing house

Bill Houghton, Sebastopol, CA

They'll probably have reduction bushings; not an uncommon part.

Re: Wire wheel question

#5

Re: Wire wheel question

John in NM

Bushings are common for bench grinder wheels, you may be able to use one of them for this. Usually they are plastic, so you could easily cut it shorter with a hack saw. Suppliers like McMaster Carr and MSC should have those, or if you have an industrial tool supplier locally they will have them. I've only ever gotten them free with wheels, so I actually don't know much about buying them.

Another option is a bronze bushing from the hardware store. Don't know if you'll find the right size available though.

A word of caution, wire wheels can be vicious on a grinder. They grab parts out of your hand and throw them across the room. They shed wires that are like little arrows to stick in your fingers. Don't wear gloves because if you get too close you won't feel it right away and pull back before wrapping a finger into the thing. Eye protection of course - I sometimes skimp on that with abrasive wheels, but never with a wire wheel.