Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

The Hand Tool Mentality Spread Outside of WW-ing?

Posts

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#26

Re: You're not alone

Patrick Chase

The Pachelbel Canon's Cello part is the same, but without any eigth notes at the end. It's just 28 repetitions of the same 2-measure all-quarter-note pattern.

It's basically "Baroque disco" (endlessly repeated 8-beat pattern...).

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#27

Re: Home site showing the full line

Wiley Horne--So. Calif.

Hi David and all,

The tool from the factory presents as stout or sturdy, rather than coarse. It seems 'right' for the purpose. I went out and checked an older much used shovel, and the green paint on the blade is intact wherever there hasn't been heavy digging. Must be epoxy. I add to the factory shellac on the wooden portions, each year.

Wiley

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#28

Re: Oh and

Bruce, a MN Galoot

Speaking of repetition,

When I was a freshman in college, a pipe organ was installed in one of the chapels on the campus I attended. I skipped class for a whole week to assist the builder/installer/organist. It was one of the best experiences of my young life. When he was finished, I sat next to the builder on the bench as he played the Bach Passacaglia and Fugue in c minor from memory. Repetitive, yes, but gloriously so.

One of my very favorite Bach pieces is his Fugue in G, The Jig.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#29

Re: The Hand Tool Mentality Spread Outside of WW-i

TomD

Fly Tying, rod making, bamboo rod making. Make some of the tools for these

Boat building, and design

Archery and all the paraphernalia related to that, most of it I buy, but I have made all of it one time or another. I am working on an anew design for a bowhunting string, it is a string, but somewhat different in most aspects than the ones that are sold. Have two quivers and those weird things that were in the thread on getting JPGs sized, on the drawing board, plus a kid wants a longbow, that will mean arrows, and so forth.

I like to make new knots, and invented a new fly fishing leader knot this spring, which is probably not useful but it was an interesting process, and now I can have a leader that uses the same knot for the loop, tie in, and joints.

Made my own climbing gear back in the 70s

Make some knives and tools, made my gas forge, solid fuel isn't practical for me. Current project is to make a 6" hand plane in the Japanese style, but not forged and all that. I don't have the scale for that.

Currently rebooting the camping gear, with two new tents, and a sleeping bag/quilt.

I have a few minor clothing projects. While struggling to get a particular sewing machine working, I made a bunch of easy projects for my daughter, in the stuffed animal vein.

Working on sails for the trimaran and a sail skiff I half designed.

Working on finishing a flats skiff I have kinda lost momentum on, and have two others in the line-up. They are wood, so related to hand tool woodworking, and that is actually the thing that got me into woodworking back in the 70s. I am working on an epoxy pump.

Did a lot of roofing this year, and figured out a shingle lift that uses climbing gear. Really kinda obvious, but someone has to be first or on their own about it. I enjoy hand nailing, though wide open running involves a gun. I like nail boxes, and have a few designs in mind for cedar shingling, I bought the one I use on the roof. They need better harnesses.

Sewed a slew of windows and screens for the porch.

Shave with a straight razor because it works better and is a lot faster if you have a beard.

Don't do much gardening, but a lot of maintenance, I use power tools since there are 150 acres and three houses in my life, but I also use scythes as they are a lot better for some things. We are prone to certain plants that will tangle up a cutter bar on a tractor, or a weed eater, and are too tall for a hand mower unless it is just a small section, a scythe goes though them and just falls over no tangles. The tractor also is beyond repair in the circumstance I have it in.

There are some things I do that fold into woodwork, but I stated them before the hand tool thing. Leatherwork is basically some of the same tools: planes, shaves, knives, awls, hammers. As well as some machines hand and power that don't work on wood, though I can sew plywood with my big sewing machine.

Metal work came out of hand tools, but for the most part to make tools, not to make them the same way.

The common thread that runs through all this stuff is sharpening. So when I started to do clothing, I bought up some super cool tailors shears patterned after, or possibly from the 19th century. From fly tying I know how to adjust scissors, and from woodworking how to sharpen pretty much anything. After a certain point taking up a new skill is easy because of the woodworking foundation and the other things. But there are also surprises. I made some gear back in the 70s sewing, but when I got back into that heavily in the last 10 years, I had a terrible time mastering the keeping them all going side of the sewing machines. And self teaching welding was also a trial. That is one activity that is very specific to the given task, and the tools you have to do it, and it is super easy if you have someone who will hold your hand, though when you get home what you learned may not apply to the machine you have. So ups and downs.

I got into this because I thought hand tools were better than power for certain things, the reverse also being true. I'm not in therapy; a Luddite; a historical reenactor. I think I like a challenge, though sometimes it ends up overwhelming. But in any case, the other things like hand tool woodworking are connected because they are a challenge, interesting; and because I have needs that the marketplace doesn't meet, so I have to make them. I could use only what is out there, and that probably would have worked out better for me. Too late now.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#30

Re: Home site showing the full line

david weaver

I probably was a bit inconsiderate in how I said that. i think the shovels on the whole look wonderful, and doubly so for the price.

I was thinking more along the lines just of the bumpy surface on the metal, but my only reference for that (since all of the stamped shovels are polished) is how a moldboard plow pulls before the bottoms are scoured. They make the tractor work hard and pull through the soil hard.

I like to turn my garden by hand, so I'll find out. For the price of that one, I'll have to try it.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#31

Gardening tools

Brian Holcombe

...are also a Japanese past time.

http://www.nakayaheiji.co.jp/contents/othertools/other-tools-English.html

I have some moderately priced shears from Hida Tool and they're a treat. I live in a builder neighborhood but as I replace and replant with what I want the gardeners tend to leave the details to me.

My trees and bushes are on the small side and I'm careful to keep them fairly small which allows me to focus on the details.

The only trouble with Japanese type gardening is that it tends to look like hell until it looks great. It takes a long time to turn a home center or garden center tree into something.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#32

Re: Spousal safety requirements

TomD

Propane, the king of gasses, makes a good forge. No more risk than a BBQ, it seems. You can also forge substantial objects with nothing more than a Bernzomatic torch, and a coffee can forge, or a brick forge. I think people have made 12 inch Bowies in those. Welding, it might be possible as a stunt, nearest I can think of is the addition of compressed air. It would be a lot easier to just get a proper burner from Hybrid burners though. A rig like that might pass unnoticed, and be brought out when she was off playing bridge.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#33

Re: Spousal safety requirements

david weaver

I think your suggestion is my likely angle - use the propane and the small footprint and dirt print that it has. Thanks for bringing it up.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#34

Re: Nobody responded to this..

david weaver

But since nobody did, I figured I'd at least let you know that I enjoyed reading it since you took the time to type it all out.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#35

Re: Nobody responded to this..

Patrick Chase

I didn't notice it the first time. Great post, Tom!

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#36

Re: Nobody responded to this..

TomD

I enjoyed it also, but I don't believe he does all that stuff...

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#37

Re: Nobody responded to this..

David Weaver

Did I just see you troll yourself?

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#38

It's a forum...

Patrick Chase

...NOBODY does what they claim.

I think Tom's point is that he trolled us the first time around by listing an improbably (though not impossibly) lengthy combination of activities. The problem here is that the bar for "recognizable trollishness" is every-increasing amidst the widespread degeneration of behavioral standards.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#39

Re: It's a forum...

david weaver

I find a lot of tom's posts kind of vague.

His list is still only about a third as accomplished as George is, though - except you don't have to make anything up on George's list.

* made two pistols, sold one to one of the dupont's kids

* made two cannons

* restored machine tools

* worked as a jewelry die maker

* worked as an instrument maker

* worked as a toolmaker

... (this list would be about 50 things long)

(and there are places I'd use a scythe once a year instead of a string trimmer 10 times if I had enough land).

Funny, looking at the straight razor thing now with the beard comment, it seemed reasonable at the time because even if you have a beard, you still have to shave.....and the kind of shaving that you have to do is best done by.....a straight razor.

To the extent that someone wants to be mean spirited and troll, though? good for them.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#40

Re: Nobody responded to this..

steve voigt

I think he just went full Tyler Durden…

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#41

Re: It's a forum...

Bruce, a MN Galoot

If you’d followed Tom’s posts through the years, you wouldn’t doubt his list of projects.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#42

Re: It's a forum...

david weaver

That's kind of what I thought, though I admittedly didn't read it with the skepticism that I should have (and kind of glanced over it quickly).

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#43

Re: It's a forum...

TomD

I kid you not, that is a very short list of what I do. Was afire with all that stuff at one point. The internet takes most of my time these days, I have slowed down a lot. I retired at 42, 16 years ago, but the first 42 were a lot more productive.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#44

Re: It's a forum...

TomD

* made two pistols, sold one to one of the dupont's kids

* made two cannons

You have to be very quiet about that up here.

* restored machine tools

Check

* worked as an instrument maker

Check

Profession was totally in a different direction, but at times it was an amorphous job where one day you would be sending out a magazine you edited; making a presentation to the legislature; deciding on million dollar fines and running an alternative dispute mechanism. Maybe being Canadian, back then, meant you have 1/10th the people to do stuff, but really it was just underfunded, which is funny for the finance industry.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#45

Re: It's a forum...

TomD

I am probably pretty bad at a lot of things. Most notably tidying up, which has become all but impossible given the scale of operation in my shop. Another is electronics, really just too ignorant, doesn't seem to be easy to pick up. Maybe with more work. Someone may have noticed my many new year's commitments to do CNC "this year". Now I am out of space to boot. I think I may manage an eggbot when the indoor season arrives as it is likely to these next few weeks.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#46

Re: It's a forum...

TomD

'Funny, looking at the straight razor thing now with the beard comment, it seemed reasonable at the time because even if you have a beard, you still have to shave.....and the kind of shaving that you have to do is best done by.....a straight razor."

It is great for going around the edges, you can just cut in anywhere and drag off the offending bristles.

But something else, and I don't know if this is a thing. But my beard, as it grows out the hairs are not uniform in length, you get a halo effect. One can use the razor with a combing action as if shaving, but some elevation, and the protruding hairs just spring off. There is a version of this one can use when the hairs on the head, cut short, start to stack up on the ears, and get back to a tapered in look without needing the full cut. Also, as the beard grow out, I get this effect where the upper edge looks as though it need thinning into the cheek, so that not all the hairs will be the same length, and wall like. Tapering they call it on a haircut. One can place the rounded edge of the blade on the cheek and just make a series of passes through the edge of the beard, and it lowers the bulk.

At one point I was cutting my wife's hair, and that of the three girls. They always looked good. Sometimes luck was involved. So while I have no idea what I am doing, I did pick up some things from that process. I never did try those razors you put on your fingers though it looks like fun.


Re: The Hand Tool Mentality Spread Outside of WW-ing?

#47

Re: It's a forum...

david weaver

Well, now I get the feeling that you may not have been trolling us.

:)

Of course the pistol story about George (and the cannons) is true. I think even Canada may have allowed the pistols he made, though (18th century dueling pistols).

The one that went to the duponts had some "ordered" parts in it. I guess he kept the other one (which I believe was made entirely by him all the way down to all of the parts in the lock set, etc).

From time to time, I'll see someone talk about how long it takes to shave with a straight razor. It takes me about 3 minutes in the morning. I can't remember how long any other decent method took, but a dull multiblade razor each day in the shower at the end of the shower (with no shave cream, etc) is probably the fastest I've ever shaved. But it wastes some water here, isn't enjoyable, and I often find "patches" not that well shaved. I haven't done that in about 6 years, but when I was young, I was obsessed with finding the absolute fastest and easiest way to do everything.

Didn't bring happiness, that's for sure!! 3 minutes with the straight is lovely, and it does tell me a little about how the day will go (lovely things like vertigo and pressure in the ears are just things that come with age, I guess).

(like the comment about being underfunded in the finance industry, too. In every business, there is a manager willing to see if he can get 2 people to do the jobs of 5 - no matter how stupid it is to underman projects).

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#48

Re: It's a forum...

TomD

One can make pistols, the license for pistols and things like the AR is pretty tight, you can basically only use them on a range. And not a home range either. So it isn't worth it to me to make that stuff, I would do it if there was some practical outlet, and have made rifles, though I traded them all away when the kids came, and for other reasons didn't see the future in them.

There is an antique exemption of sorts, but it is also pretty tight. It does not apply to versions of old designs newly manufactured.

Canada has one of the lowest murder rates, we are 167th which puts us behind a few states like Japans, and some islands that are mostly inhabited by extended families (and a large number of states with virtually identical rates). We have the second least restrictive gun laws after the US, not counting failed states like say Iraq. So you can understand why they feel the need for some very tight controls...

I agree with you, David, while some people seem to like using straight razors when they have the time, I use them because they save time, and work better. And in a world of expensive cartridges you can set up with a razor and 100 blades for what 3 blades of the kind Adrian Brody uses cost. And that is without the need to sharpen at all.

Re: The Hand Tool Mentality Spread Outside of WW-ing?

#49

Re: It's a forum...

david weaver

I haven't even tried a disposable straight yet, but I can't argue with the price of astra in an old gillette razor ($30 total, and 11 cents a week pretty much forever after that? definitely cheaper than straight razors have been for me). Stropping is about 30 seconds of my 3 minute process, and before straights, I was never able to shave close without razorburn.

It's uncommon for me to have any now, even with a random razor that I've never shaved with before.