Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

OT--Job planning tip of the day

Posts

OT--Job planning tip of the day

#1

OT--Job planning tip of the day

Wiley Horne--So. Calif.

No matter the job. It could be electrical, or plumbing, or sawing something, or drill/driving some screws. Doesn't matter. You will eventually get yourself--I should clarify 'myself'--wedged into some corner, or situation not easy to back out of. Or up on a roof. Or down under the floor joists, or up under the roof trusses and it's a 120F, and not easy to get to your shop. With a mouthful of screws or nails.

And you don't have a hammer. No freaking hammer. It's back yonder where you left it.

Hammer in every toolbox.

Over and out.

Wiley

Re: OT--Job planning tip of the day

#2

Re: Ha! Been there. Done that. 


Re: OT--Job planning tip of the day

#3

My deep sympathies

Bill Houghton, Sebastopol, CA

Whenever I'm about to do a difficult crawl in our house - crawl space, the low part of the attic, etc. - I stop and ask myself, "What will I need under there?"

That way, when I realize I need something, as I always do, I can feel even dumber. Good for the humility index.

Re: OT--Job planning tip of the day

#4

Re: OT--Job planning tip of the day

david weaver

That's a great tip, Wiley. A lot of us have a whole bunch of hammers in one place, which doesn't make a lot of sense after reading your tip.

Another thing that I try to do is have a tire meter in every car, and tape measures stashed everywhere (each floor, one in each car and one in the detached shed).