Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Rough to flat process

Posts

Rough to flat process

#1

Rough to flat process

Gary B.

I recently got some free pallet wood. All Cherry slats, maybe 3.5" x 24". They are rough cut, about 1/2" to 5/8" thick.

Seeing as I don't have a planer or jointer of the plug in variety handy, this will give me a chance to improve my hand planing process.

I started with my LV Scrub plane, which is so great at the first steps. Then a #5 with a straight iron, corners knocked off. Then a #3. After working harder than I should have, I began to realize that I seemed to be missing a step.

I don't have any Stanley irons with a significant camber. But some time ago, I converted a $10 harbor freight hand plane into a scrub plane with an 8" radius. This is significantly larger than the LV's 3" radius. I gave that a try as a middle step.

What a difference! I was able to easily cut in half the strokes needed with the number 5. Interesting what a difference in the camber can do to the feel and ease of work. I'm down to about 10 minutes to S4S a board. But, I'll only do them as I need them for projects.

Re: Rough to flat process

#2

Congrats...

Bill Houghton, Sebastopol, CA

...and thanks for letting us know your experience.