Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On β€” Est. 1998

Rule for Drawer Pulls?

Posts

Rule for Drawer Pulls?

#1

Rule for Drawer Pulls?

Clementine

Is there a rule of thumb for drawer pulls? A Stickley serving table picture shows wide pulls for two 16" wide x 3.5" high drawers, but it doesn't say how wide the pull should be. Would a single knob work just as well as a wide pull on 3" centers? Maybe it's just a matter of personal taste, but I thought there might be a rule of thumb. Thanks.

Re: Rule for Drawer Pulls?

#2

Clint Searl

Pulls must conform to the "Rule of Sevenths"


Re: Rule for Drawer Pulls?

#3

Re: Pulls must conform to the "Rule of Sevenths"

Sgian Dubh

Pulls must conform to the "Rule of Sevenths"

Clint, could you please expand on that? I can't recall ever coming across it, therefore I don't know what you're referring to, but I'm interested in finding out its meaning. Slainte.

Re: Rule for Drawer Pulls?

#4

Clint Searl

Re: Pulls must conform to the "Rule of Sevenths"

Clint Searl

Richard, my comment was intended to be a bit facetious, with no meaning, however I seem to recall reading somewhere (perhaps in one of Hillary's emails) that the most pleasing placement of a pair of hinges is in from either side of a drawer one-seventh the drawer's width. Of course, that begs the question of whether that measurement applies to the center of the pulls or to an edge, but which edge.

Re: Rule for Drawer Pulls?

#5

Re: Pulls must conform to the "Rule of Sevenths"

Bill Houghton, Sebastopol, CA

There's surely a practical element, too, though; the pulls need to be close enough to each other not to require ape arms to use them both at the same time. Not relevant for most furniture; but surely so for some particularly large pieces.

Re: Rule for Drawer Pulls?

#6

Re: Eyeball

Hank Knight

I spend some time eyeballing the first pump or pair of pulls to find a placement that is comfortable to look at, then use the placement as a template for the succeeding drawers in the piece. Unless the placement is really jarring to the eye, I don't think you need to worry about it to much.

Re: Rule for Drawer Pulls?

#7

Re: Pulls must conform to the "Rule of Sevenths"

Sgian Dubh

Ha ha. I'm not sure I'm really any the wiser. Err - Hillary's emails? I wonder if that's a reference to one of your recent presidential candidates. I'm scratching my head on that one.

Hinges on a drawer?! You've got me there. I have a suspicion you're still jerking a chain or two, but your reply did make me smile, if a little bemusedly (if that's a word).

I think I'll stick to my own guidance on pull placement for drawer fronts, i.e., whatever I deem is right taking into account a range of factors. As for hinges, I'll generally omit them on drawers unless they're something like triangular or circular drawers that pivot out from the carcase on one corner or an alternative pivot point. Designers seem to come up with pivoting drawers of one sort or another fairly frequently I suppose. Slainte.


Re: Rule for Drawer Pulls?

#8

Viewing angle

Wiley Horne--So. Calif.

I have found two things useful, not that I always make the right call :) :

1. One is to study examples of the type thing you are making. Even there, you will be thrown back on your own judgment, because you will find differences between makers, or even the same maker. However studying the examples gives you a feel for the range of variation, and you will find yourself saying 'I like that better than this.' Same suggestion for the type of pull to be used, not merely its location.

2. Second thing is the viewing angle. A pull with some projection to it will look quite different if it is on a lower drawer, say, versus an upper drawer. For example, if you want a lower drawer to look like its pull is centered 1/8"above the drawer centerline, you may have to center the pull 1/4" or 3/8" above the drawer centerline to make it look right, because the downward viewing angle makes the pull appear lower.

As Hank Knight says, all of the above requires eyeballing + your own subjective judgment. And copying a piece you like the looks of takes a lot of risk out of the deal (duh).

Wiley

Re: Rule for Drawer Pulls?

#9

Clint Searl

"hinges" should have read pulls


Re: Rule for Drawer Pulls?

#10

what about the Golden Ratio?

Joe Piotrowski

Just being evil 😜

Re: Rule for Drawer Pulls?

#11

Autocorrect

Hank Knight

I think the autocorrect demon attacked my post above. The word "pump" should read "pull." It took me a while to figure out what I had tried to say, but I'm pretty sure it was "pull" and not "pump," but it's hard to tell these days.

Re: Rule for Drawer Pulls?

#12

Re: "hinges" should have read pulls

Sgian Dubh

Brain fart then. Oh well - happens to all of us every now and then. Slainte.

Re: Rule for Drawer Pulls?

#13

Re: Viewing angle

Clementine

Got the pulls from Lee Valley. I think they will look great. I appreciate the viewing angle note. I'll keep that in mind. Thanks for the ideas, but I admit I still don't get the rule of sevenths thing.

Re: Rule for Drawer Pulls?

#14

Re: Viewing angle

Wiley Horne--So. Calif.

Hope we get to see it when it's done. Stickley furniture is useful for many, because it pretty much goes with everything.

Wiley