Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

What is this tool?

Posts

What is this tool?

#1

Jack Guzman from Maine

What is this tool?

Jack Guzman from Maine

I found this in a junk box at a flea market. The shape looks familiar but I can't figure out what is was made for. There are no sharpened edges on any part. The blade end is not a broken stub. The shape appears to be intentional. The short end could be a small slotted screwdriver. It is shaped like one. Anybody ever seen one of these before?


Re: What is this tool?

#2

It looks like ....

Brian Roberts

the tools we use for removing threaded inserts.

Re: What is this tool?

#3

Re: What is this tool?

William Duffield

The photographs provide no sense of scale or size, or even the shape of the "blade" end. Is it steel? How are the tools joined to the cylindrical bar?

Re: What is this tool?

#4

Jack Guzman from Maine

Re: What is this tool?

Jack Guzman from Maine

Sorry about the lousy pictures. The tool is 5 1/8" long. The center section(handle) is a 5/8" round cylinder . The blade is steel about 3/32" thick and one piece from end to end. The scales are held together with three brass pins. The end opposite the screwdriver blade is flat on the end and tapered in cross section. It is not sharpened to a knife edge,just tapered.---Jack

Re: What is this tool?

#5

Wild guess

Wiley Horne--So. Calif.

Could it be a homemade glazier's tool. For pressing in points, and for tooling the bead of putty?

Wiley

Re: What is this tool?

#6

Jack Guzman from Maine

Re: Wild guess

Jack Guzman from Maine

I like that. I have some old sashes to rehab. I will try it out and see if it works for the task.---Jack

Re: What is this tool?

#7

Re: What is this tool?

William Duffield

That should help somebody, but I'm afraid I still have no idea. >(

I looked at the photos again, after you mentioned the brass pins, and I could finally see the pins holding two wooden scales in place.