Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Display Case done and installed

Posts

Display Case done and installed

#1

Display Case done and installed

Bill Tindall, E.Tn.


I am glad that I used a durable finish for it (Target waterborne urethane). When I cleaned the glass with Windex (alcohol and ammonia) a shellac finish might have suffered.

The glass cost $300. I was floored. Most of the cost was the shelves, $70 each.

Re: Display Case done and installed

#2

Re: Display Case done and installed

Hank Knight

Bill, that looks great! Nice job.

Re: Display Case done and installed

#3

Well Done Sir

Ron in Sterling, CT

Hi Bill,

The case looks great. The grain on the drawer, and everywhere else for that matter, is outstanding. Now all you have to do is fill it up. :D

Enjoy!

Ron

Re: Display Case done and installed

#4

Re: Display Case done and installed

Gary B.

Very nice Bill! I find the way you flipped the rail and stile orientation interesting. Beautiful case no doubt.

Re: Display Case done and installed

#5

Re: Display Case done and installed

Bruce, a MN Galoot

Very nice, Bill! Thanks for taking us along on the build.

Re: Display Case done and installed

#6

Re: Display Case done and installed

Kees

Very nice indeed! Clean lines, has got a modern feel to it. Just enough ornamentation to make it atractive.

I have two glass supliers overhere. One is more like a boutique shop and crazy expensive. The other looks more like a factory, this is where all the housepainters go to, and they are very reasonable. But I suppose you use toughened glass? That's more expensive too of course.

Re: Display Case done and installed

#7

Re: Display Case done and installed

Derek Cohen (in Perth, Australia)

Nicely done, Bill.

Any issues fitting the glass at the top of the doors?

Also interesting placement of the handles. I might have fitted them lower. Any special reason for their position?

Regards from Perth

Derek

Re: Display Case done and installed

#8

Handle position

Bill Tindall, E.Tn.

I have done the following for several things of this nature. I put a handle in my hand, walked up to the cabinet and reached as naturally as I could conger to open the door. Where the handle landed on the frame is where it got located. (I did this operation several times. I do like some statistical validity). The handle is centered 48" off the floor. (I'm 5'7") It is a practical approach. But if you can't design, fall back to engineering, I say.

I consulted with the glass cutter before making the doors. He allowed that he could cut the glass if I provided a pattern for the door and side panel arches. I actually took the doors to the shop as well as a pattern. He fit the side panels from a pattern as the case was not handy to move to the glass shop.

When we built the last house we came by one night after it was framed, stapler and note pad in hand. We walked the house pretending to turn on lights as we traversed the rooms and halls. We stapled a note paper with an "S" on it where we naturally reached for a switch. This procedure worked out well for us.

No doubt there are other applications for this approach to locating things one reaches for.

Re: Display Case done and installed

#9

Re: Display Case done and installed

Svante Nilsson

Hi,

Good matching of the grain. The slender door frames have straight grain which give the doors a calm setting. The broader drawer have a wilder patter, but beautifully balanced. This is how I (try) to compose my furnitures....

Svante

Re: Display Case done and installed

#10

Cost of glass

GolfSteve in Calgary

Nice job on the grain selection.

I've also been burned by the cost of custom glass. When designing a piece with glass or mirror I first find a standard size off-the-shelf piece of glass and design the wood bits to fit the cheap glass.

Your curved rail design limits that option, but the curved rail is what makes this display case interesting.