Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Disston Panel Saw

Posts

Disston Panel Saw

#1

Disston Panel Saw

CJ in MPLS

Anyone have a small (~20") Disston panel saw that they can measure up for me? I have a 20" saw plate from TGIAG and am looking to form the curved back on the blade as this would match my existing, much larger cross cut and rip saws. If it comes to it, I'll use some pictures on the Disstonian website and try to scale it out.

Cheers,

CJ

Re: Disston Panel Saw

#2

Re: Disston Panel Saw

Larry Barrett

Here is a pic of a Disston D16 panel saw.

Re: Disston Panel Saw

#3

Re: Disston Panel Saw

CJ in MPLS

Thanks! That should help get the scale. What I end up with will likely be a bit of a hotch potch with a handle from one type and a blade shape from another. Hopefully it will look good and more importantly, work well.

Re: Disston Panel Saw

#4

Re: Disston Panel Saw

Christopher Fitch Memphis

I have a Disston Panel saw that I'm cleaning up now. I can try to trace the handle and post an image of that if you want.

Re: Disston Panel Saw

#5

Try this...

Christopher Fitch Memphis


If you print that as a single 8.5" x 11" page in landscape mode it should end up the same size as how I traced it.

If it does not end up correct, I can email it to you.

Re: Disston Panel Saw

#6

Re: Try this...

CJ in MPLS

Thanks. I was going to use this D-7 pattern on the TGIAG website.

I will also be remaking a handle I have on a D-8 (I think) rip blade as well (came without the handle and I kluged it last time round).

Re: Disston Panel Saw

#7

Re: Try this...

Christopher Fitch Memphis

Cool. My tracing is from a D-16? panel saw though it's quite similar to what you have. Good luck!

Re: Disston Panel Saw

#8

Re: Disston Panel Saw

Ken Martin

Here is a picture of a 20" D-8 I am in the process of rehabbing. Good luck with your project.

Ken Martin


Re: Disston Panel Saw

#9

Re: Disston Panel Saw

CJ in MPLS

It is a bit odd to reply to oneself, but I thought I'd put a quick picture of the split screwdriver a friend made for me this morning out of a harbor freight screwdriver.