Re: Mortising video
Bill Tindall, E.Tn.
I am not as patient and I usually make a deeper mortise. To speed things along I drill an undersized hole at each end of the mortise. The hole is a bit smaller than the mortise and it is close to the end....hence it can be drilled free hand and quick. The hole provides clearance so that the initial penetration can be nearly as deep a the target mortise depth, and it provides a target depth. If I drill on the drill press the whole is also guaranteed to be perpendicular to the face of the mortise, which provides a reference for the chiseling.
I typically mark the target depth on the chisel with a magic marker.
What wood are you mortising?