Several years ago I noticed an interesting log in my firewood stack. I brought it in and sawed it into small boards on the bandsaw. Some of the quarter sawn ones were pretty. I stickered them to dry on my shorts shelf and forgot about them. A month or so ago the cardboard box for my Norton combination crystolon/india stone finally gave up the ghost, so I needed to build a stone box. I remembered my firewood stash, which turned out to be cherry (thanks for the ID Bill). It was perfect. I added a strip of bloodwood for interest and knocked this little box together over a weekend. Stewie's post about his wonderful stone box prompted me to post mine.
I have grabbed interesting pieces of firewood from time to time to build stuff. I really hate tossing a piece of cherry into the flames but alot of it gets used for firewood around here.---Jack
We don't have large cherry trees where I live in South Carolina, so I was surprised to find it in my wood pile. I knew it wasn't the normal oak or hickory, but I couldn't identify it. Bill Tindall quickly identified it as cherry.
.... the quarter grain in this wood is not like any I had seen before in Cherry. I suppose it has something to do with growth outside its comfort zone. It took a bit of self convincing to conclude cherry. Never-the-less, it had other attributes that indicated cherry. It is an exceptionally pretty piece of wood, not fully revealed by the picture.
I apologize in advance for the poor photo quality, but this little joint stool I finished in 2014 was made from oak that was off the firewood pile. The legs are turned from chestnut oak and the rest is red oak. All parts rived, drawbored and pegged, etc. Finished with tinted boiled linseed oil and earth pigments. Antiquing done with a dark wax. It is about 22" tall and is a copy of one from a museum in Albany, NY. I use it as a night stand.
That's very nice, John. Making something useful from firewood makes me smile inside, like I retrieved something from the brink or rehabbed an old rust bucket tool and made it sing again.
When I toured the Albany museum with my sister years ago, I saw this little English joined stool ca 1650, and really liked it. I asked the museum guards if they minded me getting close to, but not touching the piece, in order to make a working drawing, and they said yes. With them watching me, and by holding the museum fold-out brochure near, but not touching the stool, with a pencil, I copied the stool's dimensions. Sort of an ad hoc story stick. Once back at my sister's house that evening, I drew out the actual working drawing using the marks made on the brochure. That, along with a few photos taken, allowed me to make a convincing copy of the original. Peter Follansbee's book had come out in around 2012 and was the impetus to make the stool. Took me a while, working when I could get quality shop time.
I have far better images of this along with in progress photos; some day, I'll do a posting on how it was made. Almost entirely with hand tools, except for the chain saw to cut the log and a bandsaw to trim the ends of the legs prior to turning them. I have a good, sharp crosscut saw now for that!