Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Duplicate To Windsor Chair Post

Posts

Duplicate To Windsor Chair Post

#1

Duplicate To Windsor Chair Post

Gary Smyth

Street find of this decent quality Windsor last Spring. Broken back. Old but not valuable as an example. Started in the summer and roughed out tapered ends on a new back and steamed it into shape. All left to do was insert the spindles and center the back piece. Did measuring and spacing but hit a snag. The spindles do not go through the bent wood back. The bentwood back of the original has spindle holes that are blind. I could not figure how to drill from the rounded underside about 5/16 to ½ inch at the proper angle. I set the chair aside.

Time to complete this project.

I’ve watched many videos and have little to know. The back is awkward to handle and clamp if off the chair. I figure a brad point bit in progressive diameters will work if I work from the underside. Much easier would be to work from the top, with the back in the chair sighting down from the top, making a through hole and then plugging the top hole after the spindle is seated. None of the spindle tops were wedged, only glued.

I like the paint deterioration so only the back will be painted, so showroom fit is preferred but not critical. This is to be a porch chair, undercover, but outdoors most of the time. So chair makers, restorers, anyone out there care to suggest a method to seat the spindles on a chair such as this?


Re: Duplicate To Windsor Chair Post

#2

Re: Duplicate To Windsor Chair Post

Joe in a Cleveland suburb

I don't know if this method would work for you or not, but you might look at the Cone repair method Joshua explains in the below link.

Maybe it will provide some other ideas for you?

http://www.workbenchdiary.com/2014/05/severed-tenon-repair-part-one-cone.html

Re: Duplicate To Windsor Chair Post

#3

Re: Duplicate To Windsor Chair Post

Eddie Vicarious in Northern AL

Gary,

Sorry I am replying to a post that is a month old. I wonder -- did you finished repairing your Windsor chair? Joe's suggestion was a new one for me and interesting, plus the site he referenced (by a pro, no less) seems a good place to visit. All that said, I would go with the through spindles and wedge them from the top, plus wedge the back where it comes through the arm rail. (It would be a far stretch to call me a chairmaker, but I have made a few in classes with Curtis Buchanan* and Mike Dunbar. This is how we did it, and the result is very strong.) As to the splat, I guess that I would make a blind mortise for it in the back. You had already done the hard parts as of your post, I would say. Only the exciting parts remained!

Curtis Buchanan has utterly fantastic videos on YouTube showing every step in making various Windsor chairs, and Peter Galbert has great online resources as well -- if you were to need help moving it forward. Plus, you could ask back, obviously.

Really neat chair, by the way! I'm jealous. Odds of finding such a thing in my neck of the woods: one in a million.

*If you're interested in Windsor chairmaking, put this (class with Curtis Buchanan) on your bucket list. And don't wait too long! It was easily the best week of my woodworking life -- by far.

Show us how your chair turns/turned out, please.

Eddie V.