New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

How It's Made -Particle Steels

Posts

How It's Made -Particle Steels

#1

How It's Made -Particle Steels

Bill Tindall, E.Tn.

We have had many discussions here about particle steel. While at the Midwest Tool Collectors meeting we got to meet the General Manager of Crucible Products (retired) who managed the furnaces. He likely made the CPM 3V we used to make our tools. He told us how particle steel is made.

Vanadium carbide provides wear resistance. But vanadium carbide crystals grow rapidly. If a vanadium alloy steel is simply cooled the vanadium carbide crystals will be too large (too coarse grained) to make a steel that will take a fine edge.

To make the particle steel a 3000 pound batch of alloy components are melted and forced through a small orifice. Orthogonal to the stream of molten metal exiting the hole are jets that direct a high velocity stream of nitrogen at the stream. The molten metal stream is broken up into streamers of molten metal that contract into spheres by surface tension. These micron sized spheres drop into a container of liquid nitrogen where they are quenched. The time scale for cooling is too short to enable large crystals of vanadium carbide to form.

In this doodle dust form the metal can not be fabricated. So, next this powder is sealed in a can, the can placed in a cannon barrel, and hit with 17,000 psi of pressure, which sinters the powder into a solid ingot which can be rolled into bars and sheets. No wonder it costs a bit more!

Re: How It's Made -Particle Steels

#2

Re: How It's Made -Particle Steels

Mark Hennebury

Sounds quite fascinating, i don't suppose that you have any links to a good video of it?

Re: How It's Made -Particle Steels

#3

Re: How It's Made -Particle Steels

Ed Snow

I am surprised that pressure is so low. Was it ksi?

The production method is done in an inert environment so the particles should exhibit some tendency to stick but considering that they are full glass hard, molten 2750+ to -321f more or less instantly, they won't be squishing together easily. Spheres don't have great natural packing density so I would think that you would have to be above yield even moe to get adequate contact to fuse/sinter the ingot. Granted they are very small but micron to atomic radius of iron is still a long way to go.

Maybe they use a binder/flux to facilitate the sinter with that low a pressure?

Re: How It's Made -Particle Steels

#4

Last week I went to a lecture on this at CalTech.

Chuck Nickerson

If one can cool molten metal to solid fast enough, crystal formation can be prevented.

I gather the term for the resultant material is metallic glass. It has an assortment of interesting properties.

A video of the lecture should be on Caltech's website later this week.

Besides the raw science the lecture is also wrestling with the production technology: how do you cool the molten material fast enough when it's in an injection mold?

It was a great lecture.

Re: How It's Made -Particle Steels

#5

Re: How It's Made -Particle Steels

Don Orr

That's very similar to the process I worked with for powdered metal for jet engine parts many years ago. The whole process was done either under very high vacuum or inert gas (Argon) purge. The powder was collected, screened, and put in stainless steel cans which were then extruded under heat and very high pressure into "logs". The stainless was machined off to get the final product which is an ingot of high-temp nickel based alloy which then went on to forging and machining into turbine discs. The cans were about 5" tall x 2" diameter and the logs ended up about 40" long and 8" diameter. I worked in several aspects from the furnace up to the QA lab. I would love to see video of the CPM process.