Weird saw blades - ID???
John Aniano in Central NJ Hello All,
Got these in a box lot at at flea market in the Fall. I've got several of each type.
They are 8-3/4" long overall by ~3/8" wide with 0.220" wide slots at each end, spaced 8-1/4" on center. There are three flavors - 0.042" thick with 5 tpi rip teeth, hollow grind/no set (middle blade); and 0.030" thick with 5 tpi and 6 tpi but ~1/4" wide, both with set, rip teeth (imaged at top and bottom).
Any idea what tool these once fitted? No coping or turning saw I've ever seen. Perhaps some sort of early power tool? There were several new/unused Sunbeam plunge jigsaw blades in amongst these longer blades.
Thanks,
John
- - -
My bowmaking web site I have done some sort of woodworking since I was 6 years old. In 5th grade I tried, with my father's help, to make a pine violin. It hangs on the wall in my shop. Later in middle school I had basic wood shop class. No project I can remember that survived from then! In high school, I took wood shop I and II, and metal shop I and II. This along with the usual college prep courses - my counselors thought I was nuts! I made a number of clocks during high school, maybe 2 dozen altogether, including wall clocks, shelf clocks and a pocket watch with wooden case, some of which I still have. I began to collect, restore and use old wood working tools. I especially like 19th century English tools. After graduation, I made a grandfather clock which is now on the landing of my home staircase. I made the metal dial and metal hands as well. In college, I studied Industrial Arts to be a shop teacher. I made a number of projects including a multi-wood specie flax-style spinning wheel and a walnut tool box. In 1978 I began to make stringed instrument bows, self-taught at first. After graduation, between 1982 and '83, I worked for William Salchow, who, at the time, was the best known bow maker in New York City. I stopped bow making in the mid-80's to attend college again, this time for ceramic engineering. Got married in 1988 to my wife Debbie. With her help (although I did a lot of the cooking, hey, I had the time!) I pursued a BS and MS in ceramic engineering. Worked for ~12 years as an engineer in the field of fiber optics (I have one patent to show for it). In 2002 I switched back to making and repairing bows. In 2006 I won a gold medal at the Violin Society of America's International competition. Later, in 2010, I got a second gold medal. Not easy for 50+ year old eyes! I continue to do some general woodworking - dovetailed drawers, frame and panel work, restoration tasks for our 260+ year old home - things like that. Mostly hand work. I have only a few power tools - a tiny 7" blade INCA table saw (which never gets used), 6" Atlas Jointer, 14" Rockwell bandsaw, a circa 1943 Delta 768 10" bandsaw, a 9", 3 foot Southbend metal lathe, Rusnok milling machine, a no-name wood lathe, and Jet drill press. I am a member of the Central Jersey Woodworkers Association - I was the vice president for the CJWA a few years back. I took Mike Dunbar's class in the late '90s and made a sackback chair. Back in ~2010 I outfitted a new, passive solar shop space for bow making and general woodworking. New benches, tool racks, etc. Still working (ever so slowly) on my 10 foot long Roubo-style bench. As of November 2018, the four pieces of ash that will comprise the top need to be milled and fitted, but the base is ~95% finished. Absolutely the largest and heaviest item I've ever made. It has been a fun journey so far!