New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Spend my money

Posts

Spend my money

#1

Spend my money

Tony Wilkins

I just sold an LN 5 1/4 and have about $300 to spend. There's really nothing I need but here's a list of things I could use:

- a carpenters hatchet

- an LN #49 to tongue and groove backs (like the bookcases I'm building for my wife now)

- an LN 60.5 or LV DX60 (to pair with my LN 102)

- a wider chisel (have a full LN set that ends at 1")

- a knew concepts coping saw (have a KC fret saw)

- skew block plane

Thoughts?

Re: Spend my money

#2

Re: Spend my money

John in NM

If you don't mind a suggestion not on your list - get some more wood! :D Never hurts to have extra stock on hand!

Re: Spend my money

#3

Re: Spend my money

Tony Wilkins

My wood storage is full - overflowing in fact :)

Re: Spend my money

#4

Re: Spend my money

Tony Wilkins

Two more considerations:

- a blue spruce joiners mallet (currently using wood is good urethane)

- a Chris vesper bevel gauge (but may order one for a Christmas treat for myself)

Re: Spend my money

#5

Re: Spend my money

Ray Newman

If there is nothing that you need right now, save the money until you need wood/tool/hardware for a project.

Re: Spend my money

#6

But what fun is the 'wise' thing?


Re: Spend my money

#7

Buy some wood.  Make something

Bill Tindall, E.Tn.

Lumber has been an excellent inflation hedge over the years.

Re: Spend my money

#8

Jack Guzman from Maine

Re: Spend my money

Jack Guzman from Maine

Tony,seeing you are undecided,I would suggest you stash the cash in a tool fund jar. Go about your building and what you need will become apparent soon enough.Then you will have the money to purchase it.---Jack

Re: Spend my money

#9

yep!


Re: Spend my money

#10

Wood not being an option...

Tony Wilkins

...since I don't have any more room for it and have wood for five planned and some started projects. I've got it narrowed down to:

1. LN #49 to tongue and groove the back of the bookcase I'm working on

2. Tongue and groove blades and wide adapter for LV small plow for same

3. A chisel wider than an inch (which is largest I have; lots of options)