Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Reach the woodworkers who ACTUALLY BUY

OT - wood post fence fixing

Posts

OT - wood post fence fixing

#1

OT - wood post fence fixing

Bill Houghton, Sebastopol, CA

Our property line fence is wooden posts, supposedly treated, with intermediate railings and vertical fence boards. The posts are in concrete collars poured around them. Rebuilding the fence is NOT a currently desirable project.

The portions of the posts that are at and below ground have become composted soil, based on some poking around with a long thin rod, and the fence is leaning.

I'm looking at Simpson Strong Tie's "EZ Mender," which you drive down into the concrete collar and screw to the post. It looks too good to be true, and I'm wondering what experience folks have with these.

I repaired the posts on part of this fence some years back by installing properly treated posts right next to the rotten ones, and lagscrewing the new posts to the old ones; I can't now remember how I dealt with the concrete, but I bet it wasn't fun. I'm considering a flying buttress approach - posts installed 3-1/2" away, with blocks between, and long lag screws.

Future fences are going to be built with steel, I think.

Thoughts appreciated.

Re: OT - wood post fence fixing

#2

Re: OT - wood post fence fixing

TomD

I used that to repair my parents fence. I wanted to rebuild, but there were issues around that. Plus they firmly believed that those stake type fence post holders hammered in the old post would work. And in this case I did not. They really wanted some half measures and some first class results. Anyway, i saw those Simpson Strong Tie's "EZ Mender when they first became available here, and tried one pair and did the hole fence the next year (as the HD here wanted twice what they charged at home, so I had to wait for a return trip.) Very fast patch and very solid.

In the instance I am talking about there was no concrete. There was the residue of the old post. The posts rot off at about ground level so if you span that, you can have a good post for a while. The result was a stiff as the original post. If they say it will work in concrete all the better.

The only problem on the job I did was that he original posts were firm but over the years leaned towards the east. So I made the posts whole again, but they were not straight. Not the Simpson Strong Tie's "EZ Mender's fault.

Re: OT - wood post fence fixing

#3

Re: OT - wood post fence fixing

Bill Houghton, Sebastopol, CA

Thanks, Tom. Simpson says you use them in pairs. The fence has 2x4 rails about a foot off the ground, aligned to the "front" (neighbor's) face of the fence posts, and 1x6 fence boards nailed continuously along, including right across the face of the posts. I'm thinking I might not be able to use these, because I can't put the mender on both sides of the post without doing a lot of fossicking about with fence boards while reaching through my neighbor's hedge.

The fence leans over quite a bit, to the north in my case, so I'm going to need to jack it up again and hold it there. I'm leaning more and more toward the flying buttresses. All those European cathedral builders must have been on to something, after all.

No desire, just no desire at all, to replace the fence right now; and, anyway, it's not in bad shape other than the posts being gone below ground level.

Our new neighbors on that side are working frantically to get the house ready for move-in by Christmas, having seemingly been surprised by the usual remodel reality that the job will always be worse than it appears before you start, by a factor that's directly related to how much you want the job done. So I don't want to add to their grief by asking for them to help, with either money or labor.

Re: OT - wood post fence fixing

#4

Re: OT - wood post fence fixing

TomD

In my case some of the sections had fallen off the fence, but mostly I just taped them a little to get the thickness of the stamping in behind the fence section overlap, By the time I hammered them down, I was well able to re-attach, or tighten the sections to the post.

The way mine worked was that they were a perfect fit over the 4x4, and the earth outside that was maliable enough that I could hammer the pair of clamshells in there. But in your case the concrete is formed to the post so I am not sure how it hammers in there. But the instructions say it can be...

Re: OT - wood post fence fixing

#5

Re: OT - wood post fence fixing

Tony - Memphis

Same boat here. I did the buttress thing to a couple of them as a stop gap. They are holding well. Fortunately, they are hidden by shrubs and other plants since they really don't look very nice. May try these menders next. Between the rot and tyhe pretzel shaped rails, my fence is a mess. I have used LOTS of screws trying to keep it all together.

Tony