New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

More on tapered tools

Posts

More on tapered tools

#1

More on tapered tools

Bill Tindall, E.Tn.

Someone in our club bought a tool chest that belonged to a mid 19th century woodworker (Krause) from Syracuse, NY. He reported to me that the early German planes in this chest had tapered blades and the planes apparently bought later in the US were parallel bladed. One might speculate that if there was much difference in function this person would have insisted his new blades be the same.

The squares were also tapered apparently having been forged from some smaller piece of metal and drawn out to a larger square. He reported that this tapered configuration was nice to handle.

Re: More on tapered tools

#2

Re: More on tapered tools

Rum

There are some squares still made with an intentional tapered design. I've eyeballed these before but haven't ever coughed up the money to try one.. They do look nice though.

http://www.leevalley.com/US/Wood/page.aspx?p=64334&cat=1,43513

I suspect that the taper may be more significant in the new ones above?