New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

100+ Wood Species + Full-Shop Services: Lumber, Veneer, Tools & CNC. Everything in One Place.

Admiring one's work

Posts

Admiring one's work

#1

Jack Guzman from Maine

Admiring one's work

Jack Guzman from Maine

I'm in the process of painting a bunch of windsor chairs I built. As much as I dislike the finishing step,it is the first time I actually see the product. While building I am looking at the details,the measurements,the fit and trying to avoid flaws. I see little defects that I wish weren't there but can do nothing about. I may step back and look the whole over,but only to find flaws or to make sure there are none.

Once I start to paint one of my chairs I finally get to enjoy the beauty of the form,the grace of curves the overall impact of the piece. For the first time I see it as others will. This feeling increases as I get closer to final finish. I get to see why I do this in the first place.----Jack

Re: Admiring one's work

#2

I have the same experience

Bill Tindall, E.Tn.

Although it seems to be an anathema here, I have the same experience you describe while sanding and staining.

Re: Admiring one's work

#3

Re: I have the same experience

Brian Holcombe

To be a woodworker practically means giving up the big picture most of the time in order to be tortured by details. I get to admire on occasion, usually after install and it's enjoyable.

Thanks for sharing.

Re: Admiring one's work

#4

Could we see?

Wiley Horne--So. Calif.

Hi Jack,

I always admire your Windsor furniture. Perhaps at some point you could post photos of this latest group so we can feast our eyes on them.

Only if it suits, of course (sometimes it's not convenient for various reasons).

Wiley

Re: Admiring one's work

#5

Jack Guzman from Maine

Sure

Jack Guzman from Maine

Some matching fanbacks, a continuous arm rocker and a loop back. Once I finish painting I'll post a pic or two.---Jack

Re: Admiring one's work

#6

Re: I have the same experience

Bill Tindall, E.Tn.

Don't (can't) you get to scrutinize the surface details when finish planing?

Re: Admiring one's work

#7

Re: I have the same experience

Brian Holcombe

Certainly. It takes me sone time to stop looking at specific details or hunting for mistakes in order to just live with something and enjoy it.

Re: Admiring one's work

#8

Re: I have the same experience

TomD

It's like counting the beats in a piece you don't know. Takes away a little from the enjoyment at first.

Re: Admiring one's work

#9

Re: Admiring one's work

Keith Newton

Jack, enjoy it while you can, but if your like me, it only last a couple of weeks, then you're starved to bring up the next high.

Re: Admiring one's work

#10

Jack Guzman from Maine

Yea,but...

Jack Guzman from Maine

the thing about this chairbuilding is that the process is fun. Riving logs, shaping wood using drawknives and spokeshaves on a shavehorse,steam bending,drilling with a brace and bits.Forming legs on a lathe.Everything about the process is fun. More fun that I ever had as a kid.

The chore of finishing isn't too hard to bear under the circumstances and like I said,the end result makes it worth it.---Jack