New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

How to replace missing odd Stanley screw size

Posts

How to replace missing odd Stanley screw size

#1

How to replace missing odd Stanley screw size

Bill Tindall, E.Tn.

I am repairing a Stanley 92 marking gauge. It has a missing flat head screw which is some size between 6-32 and 8-32. Has anyone solved the missing odd sized Stanley screw problem with some functional repair?

Re: How to replace missing odd Stanley screw size

#2

Re: How to replace missing odd Stanley screw size

AZ in Colorado Springs

Not the same thing, but I once repaired a Stanley plane that was missing the knob and the machine screw to hold it. I turned a new knob, but the female threads were impossible to match. I epoxied in a narrower piece of threaded rod and counter bored the knob for a couple of washers and a nut.

Re: How to replace missing odd Stanley screw size

#3

Re: How to replace missing odd Stanley screw size

Bill Houghton, Sebastopol, CA

Is there room to re-tap it to 8-32?

Re: How to replace missing odd Stanley screw size

#4

Re: How to replace missing odd Stanley screw size

Bill Tindall, E.Tn.

Is there room to re-tap it to 8-32? ?..........no, the screw head would be too big, both diameter and taper depth

Re: How to replace missing odd Stanley screw size

#5

Re: How to replace missing odd Stanley screw size

Neal in SC

A few thoughts. You might check out St James Bay Tool Co. They do list a lot of replacement parts for old Stanley tools. I don't see the screw you need, but an email might be worth your time. They have been helpful to me in the past.

Another source is Peter Niederberger in Northern California. He sells on ebay as pniederber. Also a guy who used to post on Badger Pond sells on ebay as mrsdeadhorse. He has also been helpful in the past. Both of these guys break down old Stanleys and sell the parts. They might be willing to sell you one directly, or list one for sale where you could bid and hopefully win.

Re: How to replace missing odd Stanley screw size

#6

Re: How to replace missing odd Stanley screw size

Bob Entwisle in NJ

I posted this response on the Message boards.

It may or may not help.

Bob in NJ

http://www.woodcentral.com/woodworking/forum/messages.pl/page/1/md/read/id/502577/sbj/replacement-for-odd-stanley-screw-question/#m_502577