New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

So how would you sharpen this?

Posts

So how would you sharpen this?

#1

So how would you sharpen this?

Bill Tindall, E.Tn.

While we are on the topic, I thought I would ask about sharpening "my" Swiss Army knife.


Heck, while we are at it. how to clean the barrel of the pistol? Maybe a Swiss army maintenance kit?

On display at Cody , WY Firearms museum.

BTW, I stopped by Mall of America and discovered a Swiss Army Knife Store. Inside they have a shop that will repair, for free, any knife. The knife mechanic was smitten by my old knife. He offered to fix it up but discovered no needs to be attended to.

Re: So how would you sharpen this?

#2

Re: So how would you sharpen this?

John C Lucas

Bill. There is a knife museum in chattanooga and they ha e a swiss army knife with 100 blades

Re: So how would you sharpen this?

#3

Re: It's a pistol, too..

david weaver

..the fine print on the card says it! Coolest thing about it.

To answer your initial question, I'd say one blade at a time, only once, and then preserved in light oil for future sale.

I have seen people carrying knives almost as large as that with the assumption that they will find use for the functions (a farmer in my case), but the leatherman should probably have phased those out. I had a big one when I was a kid, but the main blade hardness was less than desirable, and a medium carborundum stone was the only stone I had. I used it a lot just to use it (screwdrivers and all), but it would've been smarter to just get up, walk to my dad's shop, and get the right tools.

Re: So how would you sharpen this?

#4

Re: It's a pistol, too..

TomD

Pocket knives should be kept as simple as possible:


I suppose a knife that would keep some kids from borrowing tools from the shop might be... Priceless.

Re: So how would you sharpen this?

#5

Re: I had one too

Hank Knight

I had a Swiss Army Knife when I was a kid, too. Like you, David, I found the steel to be less than optimum. The blades wouldn't hold an edge. But the rest of the tools worked fine, even if a little awkward.

Re: So how would you sharpen this?

#6

In defence of the Swiss Army knife

Bill Tindall, E.Tn.

Mine has a stainless steel blade and I like its ability to take and keep a fine edge. I suppose it is some kin to 440 cutlery steel, which I like when it is heat treated to a higher hardness than it commonly is. The company also makes kitchen knives that are better then most.

Re: So how would you sharpen this?

#7

Re: In defence of the Swiss Army knife

Hank Knight

I think today's stainless steel is a lot different from the stainless steel of 60 years ago! IIRC, I acquired my Swiss Army knife in about 1955 or '56. I probably still have it around here somewhere.

Re: So how would you sharpen this?

#8

Re: In defence of the Swiss Army knife

Edward in Vancouver

I still have my genuine swiss army knife, which was given to me by a Swiss Army officer back in '85.

The nice officer gave me boots, a sleeping bag, clothes and even a gas mask! The Swiss army at that time contracted out the knives to two firms, Victorinox and Wenger, both knives being virtually identical. Victorinox makes some really good kitchen knives--inexpensive, but not cheap, and after almost 35 years working in commercial kitchens, I feel Victorinox gives you the best bang for the buck

Edward

Re: So how would you sharpen this?

#9

Re: Injecting some real world experience

TomD

Having been mountain climbing in Switzerland, I have seen what they use the SAK to do. It is used to cut up your slice of lard, which is just that, a piece of white pig's blubber cured like bacon. For this the knife is more than adequate. Without really raising the worry (never present in my experience), that someone will saw through your rope (which in the SA were 13 mm thick, compared to today's options at 8mm).

Re: So how would you sharpen this?

#10

Re: Injecting some real world experience

Derek Cohen (in Perth, Australia)

These knives seem to part of many of us. I am sure that many of you, like myself, have memories of MacGyver and his exploits with a Swiss Army Knife. You just had to have one, like Mac.

I have two. One I literally unearthed when clearing the land behind our current house, after moving in, in 1988. It is a medium sized tool (about 6 or 7 items, including a scissors), and looks to be a made some years before that date.

The other is a small, two-bladed pen knife I gave my dad about 30 years ago. He carried it around all the time. It came back to me a year ago, after he passed away (aged 100). Now it lives in my briefcase.

Regards from Perth

Derek

Re: So how would you sharpen this?

#11

agree on the Victorinox

Bill Tindall, E.Tn.

I have several and like the steel. They are not the Best, but very good value.

Re: So how would you sharpen this?

#12

Re: Injecting some real world experience

TomD

I have one that has a few bits and the scissors, that I do like. Before today's nippers they were in many fly fisher's hands. When I got it, first chance I got, I pried the scales off and replaced them with brazilian rosewood I had lying around. Sure smelled good.

Re: So how would you sharpen this?

#13

Victorinox bought Wenger in 2005


Re: So how would you sharpen this?

#14

Too easy, try sharpening this one

ian neuhaus

the only thing missing is an AR15


img

Re: So how would you sharpen this?

#15

Re: Too easy, try sharpening this one

Bruce, a MN Galoot

All you need to do is hire someone to carry it for you. :D

Re: So how would you sharpen this?

#16

Re: Too easy, try sharpening this one

John in NM

"Only thing missing is an AR-15"

No no, a PE 57. It is a Swiss army knife after all :D