New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

Too Early to start selling off tools?

Posts

Too Early to start selling off tools?

#1

Too Early to start selling off tools?

Ernie Miller

I am losing the feeling in my legs and thinking it may be time to start getting rid of the hoard of tools that have gathered in the Nander shop is it too early in the fall to start listing the collection off?

On a different note what are the must keep hand planes for simple work? set of bench planes, Block and Rabbits? and the 4-5 special like 71 and 45? probably 6 saws should be enough I hope. and I dont even want to think about chisels. I will be moving the shop up to the garage where there is much less space.

Re: Too Early to start selling off tools?

#2

Re: Too Early to start selling off tools?

david weaver

I think it's never too early to sell off tools you're not using.

My suggestion for ease (though it may not bring the absolute largest amount) is to list two tools per week on ebay on a straight auction, take nice tools, line up your boxes and ship two things once per week.

Much more than that, and it becomes a major issue selling all of the stuff unless you're willing to pay someone else to do it (and in that case, they will get less for a tool than you would have, list things with inaccurate descriptions and then take a large percentage of the lesser amount).

As far as what you need, decent chisels, decent joinery planes and a basic set of bench planes with double irons. I haven't found a need for a block plane in a very long time. I do include things like moving fillisters in the list, but if you do most of your work with routers, etc, you might not have much need for joinery planes like moving fillisters, rabbets, etc.

Re: Too Early to start selling off tools?

#3

Re: Too Early to start selling off tools?

Hank Knight

Ernie, I was delighted to see your post. Then I read it and it made me sad. You have been a fixture here for years. I hate to see you backing away from woodworking. My reaction is probably due to the fact that I'm rapidly approaching that event myself, and I just don't want to think about it.

In any event, I wish you well in disposing of your excess tools. Some people are going to be very fortunate to be the beneficiaries of your downsizing your shop.

Re: Too Early to start selling off tools?

#4

Re:What to keep

Ron in Sterling, CT

Hi David,

I found your comment on block planes interesting. I realize that we all do things different under the guise of hand too woodworking, but in my case I frequently find myself reaching for one of my block planes to make a chamfer, or one of a myriad of other tasks. When I get ready to thin my herd of planes, my block plane will be one of the last to go. Just my personal preference. "Different strokes for different folks".

Ron

Re: Too Early to start selling off tools?

#5

Re: Too Early to start selling off tools?

Ernie Miller

I have not posted in a long time however I have still been building. I am needing to move to a smaller space and not use stairs much any more. the summer has been really tough as I have fallen a lot or at least a lot in my mind. Sad thing is most of my tools are just simple users nothing pretty glued totes and things like that but they are tuned and ready to work. I do have some strange things I need o get rid of like a Steve Knight smoother that was a test plane he made a unique one of a kind plane that sings as well as some other oddities. and then there is all of them Secret Santa gift tools. I just cant keep everything I really need to get down to say 50 planes? That is going to be tough and Braces would you want to guess how many of them I have? cant give them things away. and Saws!

Re: Too Early to start selling off tools?

#6

Re: Too Early to start selling off tools?

Derek Cohen (in Perth, Australia)

Hi Ernie

I am so sorry to hear about your legs. Getting old sucks enough without losing some of the abilities we take for granted. That's when wisdom takes over - time to find the shortcuts, to be efficient about the way we do things.

What to keep depends on what you want to build. It is difficult to advise you as a result. What would I keep if mobility was difficult? I'd concentrate on small pieces of furniture and boxes. That directs me to smaller or lighter planes, such as block planes, a #3 smoother, #5 as short jointer and as a jack. Possibly a #6, but nothing over that length.

Bench chisels rather than long handled parers, since this would make it easier to work sitting down. Mortice chisels? Possibly, or just drill and pare. Power tools for that - hand powered drills require downforce.

I'd give the panel saws a miss and use a tablesaw. Smaller backsaw for dovetailing, tenons and other joinery would stay.

Planes for joinery must stay: router plane, a smaller shoulder plane, cannot go without a plough plane.

Very important that you give thought to work holding. A bench to sit at? A higher bench to stand without leaning over too far? A separate joinery bench? some of these are a luxury when young but become so helpful as we age.

Just a few ideas. Please post what you do. I feel like I've known you for so many years, and you are part of the family.

Regards from Perth

Derek

Re: Too Early to start selling off tools?

#7

perfect timing

Bill Tindall, E.Tn.

I'll be passing by on the Interstate 3rd week of Sept

Re: Too Early to start selling off tools?

#8

Re: Too Early to start selling off tools?

Curt Putnam

What is it that you used to be able to do and now can no longer do? As Derek said that will guide you to your "comfort" zone. If you can still do, then just start planning your tool offload. Get rid of that which you will never use and keep the rest until it falls in the category of never use.

I, too, have a host of problems and I'm not yet willing to admit that I cannot do what I want to do.

Re: Too Early to start selling off tools?

#9

Re: Too Early to start selling off tools?

TomD

I always liked the Krenov school tool list, used to have it posted on the wall behind my bench. It's pretty short, and a good reminder that you don't need 70 planes to make nice stuff. Though obviously with specialties the list can get a lot longer.

http://crfinefurniture.com/wp-content/uploads/2015/02/TTtool-list.pdf

Re: Too Early to start selling off tools?

#10

Re: perfect timing

Ernie Miller

as long as it is not the 3rd saturday I will be at a blues festival unless you want to come along it is free and a blast

Re: Too Early to start selling off tools?

#11

Re: Too Early to start selling off tools?

Ernie Miller

I can no longer do stairs very well I fall up them alot because I can not feel my legs or feet so moving the shop up and just thinning the heard I could ose a 100 planes and stil have to many

Re: Too Early to start selling off tools?

#12

Re: Too Early to start selling off tools?

Ernie Miller

Damn so I can lost 200 planes and still have plenty Not letting go of my infill just yet I can tell I have a lot of stuff to get rid of haven't even thought about all of the stones and marking gauges that have filled the shelves and drawers there is a lot of liquidating to do and still have a nice shop

Re: Too Early to start selling off tools?

#13

Re: Too Early to start selling off tools?

JDK

Where are you located, Ernie?

Re: Too Early to start selling off tools?

#14

Re: Too Early to start selling off tools?

Ernie Miller

Topeka Ks

Re: Too Early to start selling off tools?

#15

Re: Too Early to start selling off tools?

Gary B.

Ernie,

I'm sorry to hear of your predicament. It's good to hear that you're still going to be at it. I'm only 37, but I look to the forums such as this to learn more about the art and mysteries of hand tools. Hopefully you'll be able to hear the sweet "SHHHK" of a hand plane working under your hands for as long as you find enjoyment in it.

Have you considered posting in the classifieds here? There are probably others like me that would enjoy the opportunity to actually use these tools for years to come instead of putting them on a shelf and forgetting their purpose. Unfortunately there seems to be more collectors than users nowadays.

If you're at all interested in selling tools privately, my email is "Balcomwoodworks"_AT_yahoo_dot_(COM). I'm looking for a router plane, plow plane, a Disston D-8 or other serious rip saw, and perhaps more.

Re: Too Early to start selling off tools?

#16

Re:What to keep

david weaver

Certainly, I think it depends on whether you do all of those tasks with a block plane, chisel or a bench plane. I do most things that others do with block planes with chisels and smoothers (end grain, chamfers, trimming, etc).

Re: Too Early to start selling off tools?

#17

Re: Too Early to start selling off tools?

Curt Putnam

Your shop is in a basement? If so, all becomes clear now. Didn't think of a basement because there aren't any out here. Don't know why.

Re: Too Early to start selling off tools?

#18

Please be sure...

Bruce Mack

...that you have an affirmed diagnosis. Some spinal cord or nerve diseases are treatable. Not trying to meddle, just concerned.

Re: Too Early to start selling off tools?

#19

Re: Too Early to start selling off tools?

TomD

Probably the soil doesn't freeze, therefor you don't need the space for a heating unit, or the sunk foundations to avoid heave. Of course one can make homes on slab that don't heave, but overall it has not seemed to be that popular in NA.

Re: Too Early to start selling off tools?

#20

Re:What to keep

TomD

For whatever reason block planes are popular and most people will probably hang onto them. I always try to use something else, but they are handy and get used from time to time. Currently I am weaving shingles from home made scaffolding, and a plane that I can hold in one hand, set the camber to hollow out just so, and cuts like an axe, but leaves a glass smooth surface is very desirable. So I have my Japanese jack plane up there. :)

Re: Too Early to start selling off tools?

#21

Your first step should be to rethink how you work

ian neuhaus

Hi Ernie

getting old and less mobile is certainly a very big bummer for anyone.

My advice to you is to totally rethink how you will work into the future BEFORE you start selling off some of your tools.

You say you are loosing feeling in your legs and falling "frequently" which suggests that working on will likely involve a mobility aid of some sort -- walking frame or wheel chair.

modifying shop appliances (including your bench) to be used from a wheel chair will change the tools you use quite a lot. I suggest that you should become accustomed to these changes before you start selling tools. There's nothing worse than selling a tool and then 10 weeks later discovering that a change in how you work makes the tool almost indispensable.

lastly, is there anyone you trust who can help you inventory what you have and help with the sale process?

Re: Too Early to start selling off tools?

#22

Re: Your first step should be to rethink how you w

Gary B.

Excellent point Ian.

I wonder if working from a stool or a bar height chair could be an option?

Re: Too Early to start selling off tools?

#23

Re: Your first step should be to rethink how you w

Ernie Miller

I do that alot but I am having to move the shop to a much smaller space so it is time to start liquidating some stuff I only have 1 of everything the question is do I really need everything and I know the answer is no.