New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

bubbles in finished veneer

Posts

bubbles in finished veneer

#1

bubbles in finished veneer

les winter

I covered a few large speaker enclosures with iron-on veneer. I had some bubbles, which I fixed by slitting the veneer and ironing it back down. Years later, a bubble appeared on one box. The veneer is finished with shellac. If I slit it and iron it, the shellac will melt into a mess.

Any ideas other than scraping the shellac off and then applying the heat?

thanks.

Re: bubbles in finished veneer

#2

Re: bubbles in finished veneer

Tony - Memphis

What about slitting and then injecting glue into each side of the slit, then clamping? I've done that one! Never ironed on, but still had some bubbles. I think I didn't use enough glue?

Tony

Re: bubbles in finished veneer

#3

Re: bubbles in finished veneer

les winter

Thanks Tony.

I'm sure that is one way to solve it, but the iron on glue is stiff and the dome may not sit flat w/o heat to melt the glue residue.

Re: bubbles in finished veneer

#5

Re: bubbles in finished veneer

Bill Tindall, E.Tn.

If you can get a clamp pad on the bubble you can apply hundreds of pounds of force. It will mash flat

Re: bubbles in finished veneer

#6

Re: bubbles in finished veneer

William Duffield

Bill's clamp idea should work. Liquid hide glue wicked into the slit should stick to whatever is currently under the veneer.

Re: bubbles in finished veneer

#7

Re: bubbles in finished veneer

les winter

Thanks for the input all.