New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Adventures in Making Hardware - The Butler's Desk

Posts

Adventures in Making Hardware - The Butler's Desk

#1

Adventures in Making Hardware - The Butler's Desk

Brian Holcombe

Good morning! The butler's desk is nearing completion, but there are a few details left to finish, the primary one which has been lingering in my mind for quite a while is the stay for the desktop. While historical examples leave it out, I've been nervous that the desk could be damaged by opening it and letting it flop down without the supporting drawer extended.

In order to counter that I've begun building a stay out of 360 brass using a Bridgeport mill and some basic hand tools.

https://brianholcombewoodworker.com/2016/08/25/adventures-in-making-hardware/

Click the above link to see the full story.




Re: Adventures in Making Hardware - The Butler's Desk

#2

I'm impressed!

Hank Knight

I'm impressed, but I have a question. How do you get the metal chips out of your carpet?

Beautiful work, as usual.

Re: Adventures in Making Hardware - The Butler's Desk

#3

Re: I'm impressed!

Brian Holcombe

:D Hah, thanks Hank!

Re: Adventures in Making Hardware - The Butler's Desk

#4

Re: I'm impressed!

TomD

Looks very clean. Very nice. I have a Clausing 85xx milling machine. At least it is easy to move. :) And an SB shaper, and a Burk Horizontal. A bunch of lathes and odd machines. It is nice to make whatever you want to make, though I don't churn out stuff by the ton.

(One of my minor amusements is the names spellcheck suggest, normally a lot of malapropisms with ironic double meanings. As if one misspelled Microsoft, and the suggestion was monopoly. In this case I misspelled Clausing, an it suggested clunker. Shame, shame...)

Re: Adventures in Making Hardware - The Butler's Desk

#5

Re: I'm impressed!

Brian Holcombe

Hah, I find a similar amusement.

I agree, it seems to be somewhat common amongst furniture makers to eventually seek out a way toward some metal working, it's just so frustrating to limit yourself to solutions available that are based on large scale demand.

There are many types of wonderful hinges out there, but so many other parts are somewhat limited.