New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Support WoodCentral when buying things you need

Stanley plane not set up properly from factory

Posts

Stanley plane not set up properly from factory

#1

Stanley plane not set up properly from factory

John O'Connell

I need to know what is and how to set up the proper adjustment of a No. 4 plane. I do not know the proper name for the part of the plane that the iron sits against that has the adjusters on it. It seems there are two screws at the forward base and on inspection this unnamed saddle part is askew to the mouth. I do not know which screw to use as the proper one to pivot the piece to so the iron is presented properly. I picked up this once used plane from goodwill that someone boogered up trying to trim a tight door I think as the sole was plastered with latex or some kind of paint. It did not to a good job it seems so they tossed it. never sharpened and blade was not set properly. My gain!

Re: Stanley plane not set up properly from factory

#2

Re: Stanley plane not set up properly from factory

Bill Tindall, E.Tn.

I am not sure I understand the question. Making a guess, you are saying the "frog" is out of alignment. If so, loosen the screws and make it right.

From time to time people have brought some recent vintage of cheaply made Stanley plane to a planing session in my shop. They always have colorful paint jobs. I often conclude they can't be made to work satisfactorily.

Re: Stanley plane not set up properly from factory

#3

Re: Stanley plane not set up properly from factory

Bill Houghton, Sebastopol, CA

Loosen both of them, and move it around until it's aligned.

Your library will have books on woodworking. Some of them will have chapters on hand tools; that will help you understand how this tool works. There are online articles on the subject, too.

Re: Stanley plane not set up properly from factory

#4

Re: Stanley plane not set up properly from factory

John O'Connell

I am sorry It seems I did not explain myself. I do not know how close or far the frog should be positioned for proper set up. The slots in the frog have over 1/4 in. leeway for adjustment. Why this adjustment is there is a question for later investigation. my question now is if there is a "factory" set back of the base of the frog from the opening for the blade. With that info I can then set the frog parallel to the throat.

Re: Stanley plane not set up properly from factory

#5

Re: Stanley plane not set up properly from factory

david weaver

The frog should be set up so that a ruler placed on the frog would be perfectly in line with the casting ramp at the back of the mouth. On both sides of the frog.

Re: Stanley plane not set up properly from factory

#6

Re: Stanley plane not set up properly from factory

Christopher Fitch Memphis

This video covers all the parts. I'm certain there are others that have plenty of info that might be better.

https://www.youtube.com/watch?v=u3fLagdqPlQ

Re: Stanley plane not set up properly from factory

#7

Re: Stanley plane not set up properly from factory

John O'Connell

Thanks all, the video and the ruler reference was great info and i applied what I learned. I can see that this Low End plane has some inherent shortcomings. For one the frog surface for the blade is not milled and it is painted casting. I would think this would add an element of slippage but we shall see. It is not perfectly tuned as I have not put the iron in my Tormek and honed it on a flat stone but it had long shavings and has promise. My No. 3 does a better job but then I had worked on that blade and feel it is reasonably sharp. thanks again to all, I can see Planes have nuances that are worth the time to study. JB

Re: Stanley plane not set up properly from factory

#8

Re: Stanley plane not set up properly from factory

Admiral

Not having seen pics of the plane, and it likely may not have a frog adjusting screw in the sole under the iron adjustment screw, but for those that do, one thing almost universally overlooked is the adjustment of the "U" clip that fits over the frog adjusting screw. When cleaning up a plane, most folk just screw in that clip firmly, install the frog and set up the frog. I leave the U clip screw loose, as there is some play in it, and then set up the frog properly and screw it down, then I tighten the U clip screw. Sometimes, the U clip actually prevents the frog from being positioned properly, and has to be ground off at the top.