New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

This is the most versatile work station you will ever use

A practical question about flush slips

Posts

A practical question about flush slips

#1

A practical question about flush slips

Bill Tindall, E.Tn.

All this discussion of flush slips has led me to consider employing them is some upcoming drawers. Then I had second thoughts. I am looking for someone that has lived with flush slips for a decade in a drawer in regular use.

I acknowledge they have a "cool" factor upon encountering them in a new drawer such as a desk drawer where the flatness would be desirable. But, does the bead and crack collect stuff and become dirty looking over time?

Re: A practical question about flush slips

#2

Re: A practical question about flush slips

Sgian Dubh

"But, does the bead and crack collect stuff and become dirty looking over time?"

Ha ha, Bill - interesting question. I've never noticed appreciable dirt build up in any of the drawer slips of this pattern I've come across. I suppose it's possible, but what I do see most frequently is dust of some sort, but that's common in any drawer bottom, with or without slips, and pretty easy to remove if required. Of course, it's always possible someone will store stuff in drawers that might leak and become sticky - tubes of glue, Blu-Tak, toothpaste, mayonnaise and/or mustard from a lunch time sandwich stashed in a desk drawer for later, liquids, gels, ointments, and who knows what else!

If you feel the bead and quirk profile might lead to grunge build up in the quirk, you could make the slip without such a profile - make the slip flat on the top edge and level with the top face of the drawer bottom. The bead and quirk detail isn't compulsory, and in my opinion it's primarily decorative. Slainte.