New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

If you sell to woodworkers, your customers are already here

LV does come up with the coolest stuff! *LINK*

Posts

LV does come up with the coolest stuff! *LINK*

#1

LV does come up with the coolest stuff! *LINK*

John in NM

I've been using a coffee cup warmer and a 1 1/2" copper pipe cap for small batch hide glue for years - and LV went and made a real version of it with a double boiler pot (only downside to mine is that you have to keep an eye on the glue so as not to over heat it).

I may just have to upgrade! :D


mini glue pot

Re: LV does come up with the coolest stuff! *LINK*

#2

Re: LV does come up with the coolest stuff!

TomD

I use a 2" copper pipe end cap. I welded a tube joiner to it for extra height, but I rarely need the capacity. I wrap it for heat in carbon felt. Works great, about 5 bucks. I do like the new warmers that are available. For a while there they were hard to find. I got mine from LMII, but now that LV has them, I may need to get a backup.

I wish LV would carry the 180 glue though. Big bags.

Re: LV does come up with the coolest stuff! *LINK*

#3

Re: LV does come up with the coolest stuff!

Robin Corell in Atascadero, CA

I plug my set up into a variac which allows me to fine tune the temperature. Its a bit trial and error to find what settings on the variac will give me the temp I want so a thermometer is kind of a must have. Before I had a variac I used a dimmer switch to control a duplex in a box I wired up. It worked but the temp would creep up and I had to really keep an eye on it. The variac is much finer in its control and the temp doesn't creep at all.

Re: LV does come up with the coolest stuff! *LINK*

#4

Re: LV does come up with the coolest stuff!

TomD

Do you have an example of a cheap variac, Chinese preferably (due to easier import to Canada). I love the US but the border is pretty impermeable.

Maybe something like this would do, or their pid controllers. One of the problems is I just want a simple adjustment, getting feedback causes more problems than it solves. I have a laser for reading temps, as long the element is reasonably constant I am OK.

Re: LV does come up with the coolest stuff! *LINK*

#5

Re: LV does come up with the coolest stuff!

Robin Corell in Atascadero, CA

A buddy gave me the variac I have so I couldn't guess where a good place to get one would be. it is simple control the numbers on the dial mean in regards to temperature but they are useful once you figure out a good temp.

Robin