My second favorite part of a build....
Bill Tindall, E.Tn.
...is selecting the lumber. Most favorite is getting it safely delivered.
I am finishing up a bed side chest of drawers for granddaughter. While I waited for some drawer side stock to be dry enough to use I drew up a china cabinet I have needed for many years to display the family glass and ceramic heirlooms. That project got stopped in its tracks when I found I didn't have any thick ash I could cut fine grained rift grain for the verticals. I may have located some but in the mean time daughter wanted two bed side chests of drawers.
The style she chose is a walnut post and panel Danish looking style. The posts will need to be rift grain on the show sides and ideally fine grained. It is always amazing to me that in spite of a lot of lumber to choose from the grain I envision for pieces takes a lot of time to find.
Having located a fine grained candidate I skip plane the faces and lay it across my vises for scrutiny. I will get the rift grain posts from this planks edges. The center section of the plank will be just right for the rails. The plank is thick enough for its thickness to become the height of the rails, exposing more or less quarter grain for the show face.
It becomes a simple matter to lay out the cuttings and quickly whack them off with the firewood saw. My stool supports the cut-off. Bad luck ensures that if the last part of the cut splinters the splinter splits away from the width needed. Stool support eliminates that risk. Many mortises lay ahead.



