Housing/Dado joints
Tony
I have seen many ways recently how to do a housing joint (aka dado). How do you do it? Are there any tips or tricks on how to do one that you've discovered?
Knowledge You Can Build On — Est. 1998
Housing/Dado joints
Tony
I have seen many ways recently how to do a housing joint (aka dado). How do you do it? Are there any tips or tricks on how to do one that you've discovered?
Re: Housing/Dado joints *LINK*
Bruce, a MN Galoot
Here's one way, starting at about 3:25
A Japanese Master
Re: Housing/Dado joints
Derek Cohen (in Perth, Australia)
Score (with a knife), saw (to depth), and zip the waste with a chisel. Smooth the floor with a router plane to finish. The process is the same for dados or sliding dovetails.
I clamp a fence across the board. This has embedded rare earth magnets to hold the saw blade ..

Saw to depth ..

Zip the waste ..

Clean up with router plane ...

Regards from Perth
Derek
Re: Housing/Dado joints
Brian Holcombe
I use a batten and dado plane dados, chisel, router plane and saw for stopped dados.
Re: Housing/Dado joints *LINK*
JDK
Paul Sellers has an excellent technique:
Paul Sellers' Housing Dado