New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

A basswood (Linden) question

Posts

A basswood (Linden) question

#1

A basswood (Linden) question

Bill Tindall, E.Tn.

Far north one finds white pine as the preferred secondary wood. In the middle there is poplar and farther south yellow pine. Basswood (AKA Linden) grows in the middle range from central NYS to southern VA. The trees grow tall and straight and they yield good lumber. While not as common as poplar in the southern part of its range range this species would have been plentiful enough to be used as a secondary wood. Yet it didn't (and doesn't) seem to be used as commonly as these other secondary woods. There must be a reason.

It is currently cheap and plentiful in clear boards in good widths. Does anyone know why it would not be an acceptable substitute for occasions where white pine would be used? (It is harder than white pine but softer than poplar. I would not use it for drawer sides but for interior framing and drawer bottoms it would seem to be a good choice. )

Re: A basswood (Linden) question

#2

Re: A basswood (Linden) question

Ron MacLaren

Bill,

Back in the early 80's my Dad & I tore down an old farmhouse (circa 1920's) on a farm we bought in central Michigan. All of the framing and sheeting was basswood. The roof boards were pine. I still have a number of the rough cut 2x6's that we took out of the house. I have made duck decoys and numerous other projects out of the boards. I also have a 3' long x 26" wide x 1" thick basswood board taken off the outside sheeting from that house.

Ron

Re: A basswood (Linden) question

#3

Clint Searl

Re: A basswood (Linden) question

Clint Searl

It was the preferred wood for carving neckerchief slides when I was a Boy Scout 60+ years ago.


Re: A basswood (Linden) question

#4

Re: A basswood (Linden) question

Patrick Gibbons

I remember an article in Fine Woodworking by Garrett Hack where he opined on the use of basswood for secondary parts. I believe he mentioned using for drawers also. It's very stable as is eastern white pine. Haven't bought any for years. Not carried everywhere but not expensive when found.

Re: A basswood (Linden) question

#5

Re: A basswood (Linden) question

Bruce, a MN Galoot

Don't know about it being preferred but I have used it for drawer sides. It was in hand and I didn't have any poplar. I guess we'll see how it holds up -- its only been ten years.

Re: A basswood (Linden) question

#6

Re: A basswood (Linden) question

Curt Putnam

Shutters for your windows are largely made from basswod.