New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

ADVERTISE HERE - FREE TRIAL

Trestle Base Coffee table

Posts

Trestle Base Coffee table

#1

Trestle Base Coffee table

Brian Holcombe

I've been building this coffee table since some time over the summer.

Starting off by prepping the stock, I removed the wind and leveled these boards, prepping them to be glued together to form the tabletop;



You may notice that sometimes when prepping stock I like a bit of entertainment in the workshop, contrast to when I'm cutting joinery I like everything quiet.


Two glued and onto board three;


Everything is glued, leveled, jointed and thicknessed and now I a prepared to start cutting the battens;




Battens are done and now cutting tapered dados;


Followed by dovetailing them with the side rabbet;




All set;


The cherry stock is prepped for this project, all ready for joinery. I did not document the prepping of this stock since it's so redundant with the recent past.


Re: Trestle Base Coffee table

#2

Re: Trestle Base Coffee table

Brian Holcombe

Much time spent on the saw!


Finishing sawing those in two ways, I could have cheated but I wanted to retain the additional stock for future use

Started these by flattening the backs


Then reference for the sides and finally sawing the first angle, this is the attachment point for the table edge.


I planed that flat and true, then clamped this up with a batten and cut the groove with a grooving plane. Sorry I skipped the photos in the moment


Next I use the dovetail plane on both the housing and on the table edge, maintaining a comparable taper on both


Test fitting


Now making out for the second angle


and sawing


I trued that cut, cut another angle at the bottom, then rounded over the edges with a spoke shave and finally finished it all to a nice texture with the smoothing plane


I dont know what it is about these wings, but I think they are pretty neat. Obviously a bit overboard for the goal in mind, but they double as battens and are super sturdy.

Just a quick note that these are purposefully left long at the moment.

Re: Trestle Base Coffee table

#3

Re: Trestle Base Coffee table

Brian Holcombe



And here is the fun stuff;




quintessential robe shot.







Re: Trestle Base Coffee table

#4

Re: Trestle Base Coffee table

TomD

That's looking very interesting.

I have a bog standard one from Moser's book. I made some proportion changes and an ill considered cut out. I had the whole thing made but towards the end acquired a glass top, and that has ended up on it. I have been considering making a second to use up the first top.

Re: Trestle Base Coffee table

#5

Re: Trestle Base Coffee table

JDK

Beautiful work, but I must confess I stand more amazed and something I've never before seen.....carpet in a woodworking shop :)

Re: Trestle Base Coffee table

#6

Indeed.....

Bill Tindall, E.Tn.

I think one should work in a Tweed jacket whilst working on carpet :) I want to know what kind of vacuum this shop has for tidying up at the end of the day.

Re: Trestle Base Coffee table

#7

Nice wood

Bill Tindall, E.Tn.

....that part is easy to understand. I'm still trying to wrap my head around the joinery, particularly what goes where. Some more description of the pictures would be helpful. There is an angled cut I have yet to connect to the result.

Re: Trestle Base Coffee table

#8

Re: Trestle Base Coffee table

Bruce, a MN Galoot

A college woodworking program where I went to school had carpet as a sound suppression device. It was quieter and much easier on the feet.

Re: Trestle Base Coffee table

#9

Re: Flooring

TomD

I probably should have that, my concrete floor is perishing cold, and as a slab it pulls in the weather. My clean room has "broadloom" on it. I sewed it out of welcome mats from the dollar store. I don't think carpet is all that different. Dust either settles into it or sits on the surface of it, there is only a miniscule layer where a solid floor would be cleaner.

Actually, I do have some pretty interesting stuff over some of my shop. A pal was building a 46 foot catamaran, and a friend of his who does party rentals has this roll-out, hard plastic, flooring that one lays over the grass to create solid footing and spare the lawn. It is about 3/4" thick and egg crate like, or like the bottom of a milk crate. I ended up getting some of the better stuff for my floor, and have it over a lot of the floor, though I worry about covering everything as it would maybe yield to the cranes and lifts, and rolling bases, project in development. It will let dust through.

Re: Trestle Base Coffee table

#10

Re: Trestle Base Coffee table

William Duffield

Interesting breadboard end,. They're reminiscent of a form often seen in antique Chinese altar tables (which see, using Google images), with a very well done contemporary interpretation.

Re: Trestle Base Coffee table

#11

Re: Trestle Base Coffee table

Brian Holcombe

Thank you! That is what I had in mind for those sides. They serve to make it almost like a short serving table, nice for tea/coffee.

Re: Trestle Base Coffee table

#12

Re: Nice wood

Brian Holcombe

Thank you! I'll take a few more shots soon and the joinery will make more sense.

Re: Trestle Base Coffee table

#13

Re: Flooring

Brian Holcombe

The rug works fine, I vacuum it with a festool vacuum.

Cuts down on noise, I can put work right on the floor without worry of scratches and it's comfortable to walk on.