Cabinet build - drawer pull recess
Brian Holcombe
Recessed the drawers for access to the groove on the underside of the drawer above.


I fall a little more in love with this chisel every use.


Yes I actually own a scraper lol



Knowledge You Can Build On — Est. 1998
Cabinet build - drawer pull recess
Brian Holcombe
Recessed the drawers for access to the groove on the underside of the drawer above.


I fall a little more in love with this chisel every use.


Yes I actually own a scraper lol



Re: Cabinet build - drawer pull recess
Bill Houghton, Sebastopol, CA
More interesting every time you post pics.
Re: Cabinet build - drawer pull recess
Brian Holcombe
Thanks Bill!
Re: Cabinet build - drawer pull recess
Bill Tindall, E.Tn.
I was wondering how you were going to open the drawers. I could not think of any hardware option that was going to look like it belonged there.
Was it fun whittling on a completed drawer where a slip would be there for all to see?
Maybe I already asked but how are you going to finish it?
Re: Cabinet build - drawer pull recess
Brian Holcombe
Thanks Bill! Hah, yeah it does not bother me to whittle on these drawers. I was slightly worried about blow-out on the interior edge, but luckily everything went smoothly. By the time I got close I was taking light cuts crossgrain which were all terminating on the upper knife mark.
Planning to use waterlox on the cabinet.
Re: Cabinet build - drawer pull recess
Bill Tindall, E.Tn.
Will Waterlox make it stinky on the inside? If so use shellac inside.
Re: Cabinet build - drawer pull recess
Brian Holcombe
I'd like to shellac the entire project, if not for a time consideration. I like how easy oil varnishes are, but hate dealing with them.
Maybe this will be the project where I finally dump varnish.
Re: Cabinet build - drawer pull recess
Bill Tindall, E.Tn.
I think waterlox and similar varnishes provide a lovely finish. I prefer varnishes in fact. But, I would consider applying thinned shellac to the interior.
Re: Cabinet build - drawer pull recess
Don Emmerling
That is exceptional workmanship Brian.
Re: Cabinet build - drawer pull recess
Brian Holcombe
I like varnishes, but my garage is going to be about 40 degrees soon and using varnish in my basement shop is a non-starter.
So I'm considering dewaxed shellac thinned with everclear.
Thank you!
why?
Bill Tindall, E.Tn.
"using varnish in my basement shop is a non-starter." What is the problem?
There is neither a fire or health hazard to finishing indoors with varnish. It has been done since varnish was invented. The sweet smell of mineral spirits means the project is nearly ready for use.
Re: why?
Brian Holcombe
I have a 7 month old in the house, I'm extra cautious.