New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

re-toting a #8

Posts

re-toting a #8

#1

re-toting a #8

Jerry Gibbs

Friend was given a #8 plane. It is in good shape (who over uses that big a plane?). He thinks the tote is too small for his comfort and is losing interest in rehabing the plane. The tote has a machined bed it sits on and needs to be close enough to work the alignment lever. I have included two pictures which have a 6" scale. He would make a bigger tote if it could work. Thanks, Jerry


Re: re-toting a #8

#2

Re: re-toting a #8

Derek Cohen (in Perth, Australia)

Hi Jerry

Firstly, you can make any size handle (Tote -- aggh!) that will fit. However, the handle is missing the horn, and this may make the grip area smaller. Add in the horn, and the size may become acceptable.

Secondly, the reason that this looks restricted at this moment is that the adjustment lever appears bent over the handle. It needs to be straightened up. Once done, if you choose, a taller handle could be fitted.

Regards from Perth

Derek

Re: re-toting a #8

#3

Re: re-toting a #8

David Charlesworth

Is he aware that Stanley handles are used with a three finger grip?

The forefinger is pointed forwards.

David