New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Hotrod your LN #60 1/2 Block Plane

Posts

Hotrod your LN #60 1/2 Block Plane

#1

Hotrod your LN #60 1/2 Block Plane

Derek Cohen (in Perth, Australia)

I spent the past weekend at the Perth Wood Show, and had a bit of fun demoing planing and sharpening for LN Australia. One of the bits I came away with was an adjuster modification by Bob Howard for the #60 1/2 (it may be used on some other LN planes as well). See: http://www.henryeckert.com/index.php?route=product/category&path=290_316

Notice anything different?


Well, the adjuster mod uses a bearing ...


You can see the original adjuster alongside ..


The result is a much smoother adjustment of the blade.

Regards from Perth

Re: Hotrod your LN #60 1/2 Block Plane

#2

Re: Hotrod your LN #60 1/2 Block Plane

John in NM

That is a nice mod!

Unfortunately, I don't have one of these planes - finger recesses are too small for comfort :(

Re: Hotrod your LN #60 1/2 Block Plane

#3

Re: Hotrod your LN #60 1/2 Block Plane

William Duffield

I agree, that's a very good idea. I don't have a L-N #60-1/2 either, but I do have their large shoulder plane and their skew block plane.

Before you throw in the towel, you might want to ask L-N if they will machine some custom finger grips in a 60-1/2 for you. They have always been quite accommodating of minor custom modifications. They put a nicker in my #140 for me before it was a standard option.