New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Domestic, Figured & Live Edge Hardwoods in Stock. Best Prices for Serious Woodworkers.

Hoof Rasp

Posts

Hoof Rasp

#1

Hoof Rasp

Bruce Mack

I have a recent passion for spoonmaking, with elements of sculpt as you go, green woodworking, woodfinding, and the use of axes, hatchets, drawknives, and spokeshaves. I like deep bowls as they look good and immediately distinguish the product from machine made spoons. Once I have gouged a good looking bowl, I work on the outside to leave it substantial, shapely, proportionate to the bowl, and not too heavy. The handle/bowl axis should result in good control and a pleasant user feel.

I have worked the bowl convexity with spokeshave and a Shinto rasp as well as Nicholson 49. Today I had a lot of wood to remove and took a Mercury 14" farrier rasp off my shelf. One side is a serious rasp; the other an equally serious double cut file. Both sides are flat. My wife's farrier had given it to me a few years ago and had said I would have fun using it on wood but I had had no occasion to use it seriously until today. It was very effective and shaped the bowl roughly but usably much faster than I was accustomed. The file side smoothed the striations and left the bowl ready for the usual sequence of rasps, files, etc.

This may be useful to makers of other shaped surfaces, and at $20 is quite affordable.

Re: Hoof Rasp

#2

Hoof Rasp

Tom Colligan

Good point, Bruce. A few years ago Scott Phillips of The American Woodworker featured an Idaho bow maker. In the process he used a farrier's rasp for much of the shaping work followed by a spoke shave. I also got one and used it effectively in shaping the parts to a bow saw.