New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Price drop on over 1300 Rockler items

flattening india stones

Posts

flattening india stones

#1

flattening india stones

les winter

I use oil stones with water on my mostly A2 blades and chisels. I recently bought a new fine india and a new medium india. Both arrived a bit out of flat. Both boxes had instructions to use oil or tap water. I do not remember the tap water option being discusses before.

I took an extra coarse DMT to the fine india and immediately got a mess of extremely thick oil which clogged the DMT. It was a job to clean it up. It's not usable for flattening the india.

So I took out a glass plate and some 45 grit silicon carbide powder and went to work using windex to dilute the powder and clean off the stone after a few rubs. All is well.

But the notion that I can use water vs. the oily mess on the diamond stone has me confused.

The india's work fine with dilute simple green detergent for sharpening very small micro bevels.

Do I need to boil the india to remove the internal oil to allow periodic flattening with the diamond stone, or am I stuck using abrasive powder?

thanks

Les

Re: flattening india stones

#2

Re: flattening india stones

Jim Matthews

It's what I use. I clean the slurry off with a file brush, using WD40.

I also use WD40 to hone.

Re: flattening india stones

#3

Re: flattening india stones

les winter

Thanks.

Re: flattening india stones

#4

Re: solution

les winter

I tried kerosene and my diamond stone. Works fine. So I will sharpen with water/soap and flatten with kero.