New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Abingdon, VA – Tree Cutting & Portable Sawmill

Smoothing Line and Berry decoration

Posts

Smoothing Line and Berry decoration

#1

Smoothing Line and Berry decoration

Bill Tindall, E.Tn.

The panels shown earlier have yet to be final smoothed to be ready for finish. Steve Latta cautions about sanding them to any great extent. He uses a scraper. Last night I tried a hand plane on a test panel. It was set to a very fine shaving and had the cap iron set close to the blade tip. The result looked satisfactory. However, these door panels are only 1/2" thick and they don't stay perfectly flat by themselves (they will in the frame). I may have a difficult time planing them if they hump much. I have a newly sharpened scraper at the ready.

An unanticipated problem with sanding is the fact that walnut sanding dust acts like pigment stain on the Holly. Anywhere that there is torn grain or other roughness captures dark dust and makes the Holly look dirty.

Re: Smoothing Line and Berry decoration

#2

What I actually did

Bill Tindall, E.Tn.

I was successful hand planing the pattern. I set the blade to a very fine cut, set cap iron close and the result was as good as it gets. The string made some interesting patterns in the shavings. Even with the strings going every which way it planed just fine going with the grain of the walnut panel.

Re: Smoothing Line and Berry decoration

#3

thanks for the update, pictures?