New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

log to spoon

Posts

log to spoon

#1

log to spoon

Bruce Mack

I am an amateur woodworker who owns way more hand tools than he needs. A few months ago I got 3 cherry logs from a friend who intended to use them to fuel his maple sugar boiler. With usual overkill I bought a splitting axe, a chopping axe (Fiskars- total $75), 2 draw knives (the first came with about 40 degree total inner and outer bevel, requiring too much reworking in my opinion), and made a chopping block of upended treated 4x4s.

Well, it has been great. The spoons emerged, righties and lefties depending on the recipient. I got to use many tools - axes, drawknives, spokeshave, gouges, hook knife, chisels, saws, scraper, rasps, files and sandpaper, as well as bandsaw (to remove much of the sapwood). The most recent spoons have been heavier in handle than those I have seen, but well received by the users. I wish I could post a picture but the process including resizing defeats me.

I exult, because for the first time in woodworking I got to work wood from log to product. Though requiring no joinery, spoons can have variety and figure. This will make non tree huggers wince, but in some crazy way the energy expended lives on in the spoon. Over and out :)

Re: log to spoon

#2

Sounds like great fun, and..

Bill Houghton, Sebastopol, CA

..a better use for cherry than as firewood.

Re: log to spoon

#3

Re: log to spoon

Bruce, a MN Galoot

That sounds like a great time. What brand of hook knife do you have? I've been looking for one. The spoons I've made have been produced with an 8/13 Swiss Made chisel and goose neck scraper, there has to be an easier way.

Re: log to spoon

#4

Re: log to spoon

Bruce Mack

Bruce- I have a Mora 164. As others have noted the bevel is too steep. I used a belt sander clamped upside down in my vise to make a more acute angle (don't have a grinder). Messing with sharpening/honing, I'm currently using dry silicon carbide paper (240-600) grit in full sheets on a granite plate (HD tile will do) with the tricky hand rotation shown by Del Stubbs in the video on his excellent Pinewood Forge site. I'm getting better at confining this motion to the smaller surface of my Spyderco stones too. An alternative/complementary method is to clamp the handle in your vise and follow the curve with a small paddle of wood to which you have glued or PSA'd strips of your favorite grits on each side.

Confession-I bought one of Del's 1 3/4" hook knives, a piece of beauty. It has a tighter curve than the Mora and is wicked sharp. I took a couple of test swipes but am reluctant to use it routinely as I might then have to sharpen it and screw it up.

Re: log to spoon

#5

Re: log to spoon

Bruce, a MN Galoot

I've had a Two Cherries basic chip carving knife for years and I couldn't understand why it wouldn't work properly when I tried carving. A carving buddy explained that the bevel was waaayyyy to steep, so I spent some time this week re-grinding it with 400W/D paper. I'm nearly finished and already the difference is astounding. Not sure I want to go through that with a Mora, though they get fine reviews on the quality of the blade.

Re: log to spoon

#6

Re: log to spoon

Bruce Mack

Though Del's knife is much better out of the gate, by the time you have learned to sharpen the Mora you will have a very serviceable knife. Del has about a 6 week waiting list so I began with the Mora. Irrationally I ordered Del's about when the Mora started working well for me.

Re: log to spoon

#7

Darrell in Oakville

Re: log to spoon

Darrell in Oakville

Bruce

My wife and I were over in the UK mid-May, and spent the weekend at the APTGW annual general meeting. That's the Association of Polelathe Turners & Greenwood Workers; they call it the Bodger's Ball. LOTS of spoons, and LOTS of people wiling to spend all the time you want talking about and making spoons (amongst other things). I teamed up with a fellow from Ireland in the Egg & Spoon Race. They give you a hunk of freshly cut wood and 30 minutes to carve a spoon and turn an egg, followed by a 50m 3-legged race. We dropped our egg (twice!) and came in 4th.

I have a few hook knives, a Frost, one of Ben Orford's small knives, and one of Del Stubbs knives. I like Del's best, it works amazingly well. A lot of the guys at the Bodgers Ball were using a Twca Cam, which is a really big hook knife, and they were doing great work.

The other event I signed up for was the Team Log To Leg Race. We were given a half a chestnut log, and had to split, shave, and turn a pair of legs (on a pole lathe) to match the master leg on the judges table. I'm not sure what our time was (less than 10 min I think) but we won. If you want a challenge working green wood from a log to finished product, try beating the world champ's (in the Singles event) time of 7:42 for a pair of legs.

Ahh, yes, green wood is sometimes the most fun!

Darrell


img

Re: log to spoon

#8

Re: log to spoon

Bruce Mack

I have not been there, but I gather the UK has many more well respected and well maintained niche interests than the US. Thanks for your wonderful reminiscence Darrell.