Custom Cut Nails
Bill Tindall, E.Tn.
The nails that go into brad nailers make dandy cut nails. they can be nipped to any desired length. They have a glue coating on them so they hold tenaciously.
Knowledge You Can Build On — Est. 1998
Custom Cut Nails
Bill Tindall, E.Tn.
The nails that go into brad nailers make dandy cut nails. they can be nipped to any desired length. They have a glue coating on them so they hold tenaciously.
Re: Custom Cut Nails
TomD
Are you predrilling the holes with the marked bit? All my brad nails are soft and round, are yours square and hardish?
Re: Custom Cut Nails
Bruce McCrory
I was tacking thin trim onto casings. After separating a few brads I learned to appreciate the design of the guns they are made for. Realized I needed a magnetic tack hammer; and then, split the trim anyway. Forgot the size, but several hundred might fill the space of a Bic lighter.
Wonder if Tremont makes them? Might be worth it after the trouble I went through.
Re: Custom Cut Nails
William Duffield
Yes, in lots of different sizes:
http://store.tremontnail.com/cgi-bin/tremontnail/items?mv_arg=34
I wonder why I can't find the term "sprig" on their website. That's what they used to call this kind of nail.
You will note in my earlier post......
Bill Tindall, E.Tn.
.....on this molding that I predrilled the small molding I was nailing. The pilot hole both eliminated the splitting risk and provided a starting hole that made the nail trivial to start with the hammer shown.
When doing house trim the air driven brad nailer is employed. For a few nails in a delicate molding on furniture I rely on the manual approach.