New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

REAL MILK PAINT

William Duffield to speak........

Posts

William Duffield to speak........

#1

William Duffield to speak........

Bill Tindall, E.Tn.

at the Holston Valley Woodworking club meeting. 6:30 Wednesday June 10, Kingsport TN. You all are welcome to attend.

Re: William Duffield to speak........

#2

Re: Copy of Meeting Announcement

William Duffield

I’m a geezer woodworker with back problems, deteriorating eyesight and an interest in a wide variety of woodworking techniques and furniture forms. I also do a fair number of demonstrations at remote locations under a wide variety of working conditions. I built this “meta-bench” (or whaatever you want to call it) to relieve some of the back pain while I’m working in my shop and to make it easier to transport what I needed to a wide variety of venues. As it turns out, the subject of most of my recent demonstrations have been of the bench itself.

I will discuss its origins, its uses, and some of the design options, both good and bad, that will help you to decide whether you want to build one for yourself, and what features you want to include or to leave out. We will discuss work holding strategies, dimensions, weight, materials and accessories. We’ll also investigate its application to a variety of woodworking operations, including joinery and surface decoration. For example, I’ll show how I and other woodworkers use these for building and installing inlay and stringing, for carving, and for sawing dovetails, etc. I will also show strategies for transporting it and securely attaching it to the wide variety of substrates that you may encounter at woodworking shops, sawmills, warehouses, craft fairs, and other, less accommodating venues.



Re: William Duffield to speak........

#3

Re: Copy of Meeting Announcement

TomD

I always liked that bench.

Re: William Duffield to speak........

#4

Re: William Duffield to speak........

John Jardin

Bill,

Would you please post directions to the meeting...I will be traveling from FL

Re: William Duffield to speak........

#5

directions

Bill Tindall, E.Tn.

Directions to Eastman Lodge 6:30 meeting start

-Take I-26 West toward Kingsport

-At exit 3, take off-ramp for Meadowview Parkway

-Turn left onto Meadowview Pkwy and go 0.3 miles

-The Road name changes to Reservoir Rd. Go 2 miles more.

-Turn right on Bays Mountain Road and go 0.2 miles to a fork in the road.

-Take the right fork to the Eastman Recreation Area. (The left fork goes up the mountain to

Bays Mountain Park.)

-Immediately after you take the right fork, you will pass through a gate. Go about 0.2 miles and the Eastman Lodge will be on your left.

Up until the last 1/3 mile you are headed to Kingsport's Bays Mountain Park

Re: William Duffield to speak........

#6

Re: William Duffield to speak........

William Duffield

You must be on your way to the SAPFM Mid-Year conference (like me).

Please introduce yourself. There's a possibility we met in Williamsburg in January. I grew up in Lake Wales.

Re: William Duffield to speak........

#7

Re: William Duffield to speak........

John Jardin

William,

I did attend the January SAPFM Conference but missed meeting you as you attended the early session and I the weekend. I am indeed looking forward to meeting you and attending your presentation at the Holston Valley Woodworking club.