New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Premium Live Edge Slabs, Hand-Selected in the Berkshires. Shop Unique Hardwood Pieces.

Sharpening a divider

Posts

Sharpening a divider

#1

Sharpening a divider

Bill Tindall, E.Tn.

We had an interesting club program last night. A local period furniture maker/restorer gave a program on sharpening. It seemed that he brought every tool in his shop to describe how it was sharpened. It was the first time I ever saw a circular saw set. but to continue... He described sharpening a divider, a topic I have never seen discussed. This handy tool is something I discovered late in my woodworking. I think it is under discussed, and under used by many. The presenter, Buddy Floyd, sharpens the fixed point conical and the other point that will be swung to scribe arcs was sharpened in a square pyramid (square base with sides sloping to a point).

His sharpening for edged tools was a bit novel. Most tools (carving excluded) were hollow ground on what looked to be a 7" wheel, then an India stone, "black" ARK stone and final strop on bare leather. He held the blade stationary on vertically on edge and rubbed with a circular motion the bevel with small varieties of the stones mentioned. Once again the point was illustrated that there are many means to an end.

Re: Sharpening a divider

#2

Re: Sharpening a divider

AlanWS

"He held the blade stationary on vertically on edge and rubbed with a circular motion the bevel with small varieties of the stones mentioned."

Could you clarify this?

Re: Sharpening a divider

#3

a picture worth a 1000 words

Bill Tindall, E.Tn.

To answer your question, maybe........

The idea is the blade remains stationary and the stone moves like a file. Many times he referred to what he was doing was "filing with a stone". I sharpen an ax this way, for example.

Left hand holds plane blade. Blade rests on a table vertical. Right hand holds a small stone , 6" or there abouts. Left hand/blade is stationary. Right hand orients stone to engage bevel. Stone rubs bade bevel in circular motion (swirling) up and down the bevel. (In fact the stone is angled slightly to the bevel to create a slight secondary bevel.) Burr is broken off between grits by rubbing back on a hard ARK stone.

Obviously something is missing because the stone could not easily get the bottom of blade if it was resting on a flat surface. Whether the blade was elevated above the table surface by the small block of wood on the table or the bevel over hung the table edge, I can't recall.

There is merit to consider here. One can get by with a much smaller stone. It may be easier to maintain stone to bevel orientation by this approach. He was quick about it, as professional wood workers seem to be.

Re: Sharpening a divider

#4

Thanks.  Makes sense.


Re: Sharpening a divider

#5

Re: It's not nuclear navigation

TomD

I just converted one for scribing leather, but it works the same as what Bill is describing. You want one that is a point for rotation (or in my case to also run along the side of the leather like the fence on a marking gage). And one to cut like a knife, or in my case crease like a "folder". I got the result I wanted by bending the knife point inwards and then grinding it off flat on the inside, which gives a parabolic fingernail shape that works nicer than a triangle.

Having dividers for special purposes is a wise investment as it saves time and improves results.

I got turned onto them about 25 years ago when I was showing my uncle a project I was working on, and he obviously thought I was a peasant about the whole thing, and got some of my dividers and showed me how to step out the divisions I was after in a way that would maximize accuracy. He was in charge of the Admiralty charts and was a trained geographer and map maker. Sounds like a lot of parchment and hand tools but during his time the main issue was how to navigate subs that stayed under water months at a time, pre GPS. Seemed to have a lot to do with mapping the temperature of ocean currents. But he still knew the old methods, and his dad was a joiner.

Re: Sharpening a divider

#6

Re: It's not nuclear navigation

Edward in Vancouver

Both of mine are flea market finds, and they all had bent legs of differing heights. I just ground them down to an even length, then opened them up, chucked one end in a drill, and let 'er rip with the drill running on a moving sanding disc.

Perfect conical points....

May the tool gods smite me with a crooked, mis-shapen chinese-made hammer

:D