New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Need a tree taken down or milled?

help me ID a furnituremaker in Hawaii

Posts

help me ID a furnituremaker in Hawaii

#1

bridger

help me ID a furnituremaker in Hawaii

bridger

I have been asked to repair a couple of tables. they were made about a decade ago. they have koa veneer tops that are having a problem. I need information about how they were made- what adhesives were used, what substrate is under the veneer and what the finish is. the owner bought them from a gallery on the island. perhaps someone here would recognize the work or the signature.


img

Re: help me ID a furnituremaker in Hawaii

#2

bridger

Re: help me ID a furnituremaker in Hawaii

bridger








thanks!

Re: help me ID a furnituremaker in Hawaii

#3

Re: help me ID a furnituremaker in Hawaii

Bill Tindall, E.Tn.

There are several shops in Kona. maybe ask the chamber of commerce for help tracking down that person, or yellow pages for Kona. I used to know a furniture maker there but have lost track of him.

Re: help me ID a furnituremaker in Hawaii

#4

Re: help me ID a furnituremaker in Hawaii

Ernie Miller Topeka

Bill I know who you are talking about if you could refresh my memory on his name I would be able to look him up we talked about a year ago when his deep water night time photography won the awards.

I am terrible with names Sorry

Re: help me ID a furnituremaker in Hawaii

#5

Re: help me ID a furnituremaker in Hawaii

Phil Sylvester

I think that is Barry Williamson.

His site is not working so I pulled this from the internet archive:

http://web.archive.org/web/20131006163246/http://koagold.net/OriginalDesign.htm

Also, this gallery lists him:

http://www.harborgallery.biz/contact-us.php

Re: help me ID a furnituremaker in Hawaii

#6

bridger

Re: help me ID a furnituremaker in Hawaii

bridger

I just had a long talk with Barry. these are definitely his tables. Very nice man. he had some good suggestions for how to deal with the situation, and offered to send some wood to use for the repair.

thanks for the link. ain't the internets wonderful?

Re: help me ID a furnituremaker in Hawaii

#7

Did he use shop made veneer?

Dick Coers

Just wondering what went wrong here, and I'm thinking he left the shop sawn veneer too thick. I'd appreciate what he speculated on with the failure. Thanks.

Re: help me ID a furnituremaker in Hawaii

#8

bridger

Re: Did he use shop made veneer?

bridger

I didn't ask him if he sawed his own veneers. they do look pretty thick, though. what is the problem with thick veneers?

a bit of background on these tables. they were made and purchased in hawaii, lived for some years in washington state (the pacific northwest), then moved to Tucson AZ (desert). so, pretty harsh humidity changes there. kind of hard to blame the guy too much for the failure.

the substrate is lauan ply. the adhesive is urea-formaldehyde. the finish is lacquer.

Re: help me ID a furnituremaker in Hawaii

#9

Re: help me ID a furnituremaker in Hawaii

don stephan

If the veneer is thickish, could the stress caused by dry climate pulled the luan plywood apart?

Re: help me ID a furnituremaker in Hawaii

#10

Thick veneer acts more like lumber than veneer

Dick Coers

You get the same expansion and contraction with veneer that is much over 1/16", as you do with solid lumber. You don't get the stability that veneer gives you. I bet that is much of the problem here.