New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

A55 Smoothing Plane

3-D Printing

Posts

3-D Printing

#1

3-D Printing

Bob Ibach

Has anyone tried making a 3-D printed part for an old tool?

My #140 block plane is missing its side plate (as usual). I would like to make a 3-D printed replacement plate. I don't expect it to be functional or add any value to the plane--I am just curious to see if it can be done.

The local library has 3-D printers but I need to create an STL file from a CAD drawing. Can a CAD drawing be made from a manual ink-on-paper drawing?

Is this going to be way more complicated than it is worth?

Is it a foolish waste of time?

Bob Ibach

Re: 3-D Printing

#2

Re: 3-D Printing

TomD

Yeah this is going to be way more complicated than it is worth. But it can be fun. I started CAD back 20+ years ago, and there is a disadvantage to that in that the modern "maker" approaches have seriously deskilled the process, which is what one want if one wants to get results. Maybe you have a local maker space that would have the tools and info you need to get a quick start.

There is a website that starts as shapes that you can then modify to do your thing. It is called Blender. Since I learned old fashioned cad, I can't really say how easy you will find it as I don't use it. But the idea is certainly to make it easy.

Can you turn regular pictures into CAD? There are file transfer softwares, like I use Inkscape, which is free and I just use it to convert PDFs. If you look up jpg to dxf transfer utilities you can find stuff like that for any format. Already existing programs you use like photoshop, or Corel Draw can allow you to save one format into another. But how useful it will be depends on how convertible the file is. Something like a very clean outline is probably easiest. What I normally do is import pictures then draw over them to get an original CAD file I can use. CAD is good because it can be most easily converted into machine instructions, and it can be easily modified for sizing and so forth.

The way one would normally make a sideplate would be in 2.5D You draw the profile, and then you simply add those 3 dimensional aspects to the G-codes that will allow a machine like a router to cut it out, so the machine has to know how deep to cut each pass. But basically it is just making an outline. In printing the machine needs to know the rate at which to build stuff up. But you can get into actual 3D if you need to add a real third dimension to the part. There are softwares that do specific things like create the 3D sculpturing that is required to a person's face, or make a wing. These are simplified single purpose interfaces that do this stuff efficiently without your having to master a lot of steps.

You can outsource the work to companies that print stuff at a reasonable cost. Shapeways is one of these, but there are others. They can do a variety of metals.

Re: 3-D Printing

#3

Re: 3-D Printing

david weaver

I haven't, but this is something you could make by hand.

The biggest challenge of the whole ordeal would be getting rod in the right diameter for the side fixtures.

I'd imagine it could be pretty easily printed, too, but no clue what the finish would look like, you'd still have to finish it.

You could make it out of brass by hand, too, if steel seemed too much of a pain.

The hacksaw blades sold as 18tpi with no set that are made by lenox will cut everything up to annealed O1 with good speed. Thinner stock suggests a bit more of an angle in the cut (to get more teeth engaged) will slow down the teeth breaking off, but I have made several irons using one blade (including cutting the slot on one), and the infill plane in the gallery was cut out of O1 all using a comb cut technique and a single lenox 18tpi hss hacksaw blade.

Silver solder or peining would be fine for the pins.

Re: 3-D Printing

#4

Re: 3-D Printing

TomD

He said he was curious about the process. As you say, if you are OK with cutting one from plate, that would be a lot simpler. Printing gets to be economical when you want to print your children's faces in it, or something. Once you start the machine, that can be faster and cheaper than making a solid side.

Re: 3-D Printing

#5

Re: 3-D Printing

Jerry Nicholson

The widely used SketchUp program has an add-on that will export an STL file. The information with my 3-D printer says the objects it produces are about 40% as strong as an object made by injection molding the same plastic. My 3-D printer is seriously out of date - I have had it for almost 3 years.

Jerry