New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Want Better Milling & Firewood Knowledge?

单线刨子 (fillister) and 裁口刨子 (rabbet)

Posts

单线刨子 (fillister) and 裁口刨子 (rabbet)

#1

Chris Scholz

单线刨子 (fillister) and 裁口刨子 (rabbet)

Chris Scholz

Ok, here are four more videos on plane making.

First a moving fillister plane 单线刨子 (dan xian boa zhi)

Part 1: (I believe I posted this before a while ago)

If I undersood that correctly then the wood that 辛老師 (Master Xin) uses for this plane is huali mu (花梨木 "flowering pear wood", some type of "rosewood").

Cutting the plane body and fitting the iron


Part 2: Fitting the fence, fitting the wedge, cosmetic and ergonomic fine-tuning, test cuts. Towards the end of the video (around 25 min) he shows his plow plane, a dovetail plane (27 min) and a molding plane (28 min)



URLs in case the embedded video does not work for you:

http://v.youku.com/v_show/id_XNTIxODQzOTc2.html

http://v.youku.com/v_show/id_XNTIxODgzNDUy.html

Second the (skew) rabbet plane 裁口刨子 (cai kou bao zhi). It appears as if the 裁口刨子 is used to clean up the work from the 单线刨子 (fillister plane). Not sure if that plane has a similar usages as our shoulder plane, I hears some folks in Europe expressing strong opinions that you don't need to clean up a shoulder if you cut it right the first time.

Part 1: Layout and cutting/shaping the mouth opening and fitting the blade. He just eyeballs the skew angle.



Part 2: Shaping the blade on the grinder, fitting the wedge, fine tuning, ergonomic and cosmetic improvements, a bit more tuning. He says he is very pleased with how this plane turned out and that they are a bit challenging to make. He also goes on for a considerable amount of time that a woodworker who can't make his own tools should not be called a woodworker. Even store bought tools need to be adjusted and find tuned, so why not make the whole thing yourself?


Again the URLs:

http://v.youku.com/v_show/id_XNTI0OTc5Mzgw.html

http://v.youku.com/v_show/id_XNTI0OTgzNTc2.html

Re: 单线刨子 (fillister) and 裁口刨子 (rabbet)

#2

Re: 单线刨子 (fillister) and 裁口刨子 (rab

TomD

Thanks, I still haven't worked my way through the saw ones. I is just above freezing in the shop, therefore ski weather. I know I will appreciate these when I get to them.

Other topics I am interested in are:

- I bought a bunch of the "cheap" chisels off ebay, and need to understand what handles fit on what type, so anything on handling chisels (actually mostly gouges)

- As mentioned earlier, the bow back chairs.

- Anything on knock down joinery.

- Anything on making floats, gimlets, other fun stuff. I am adding Chinese tools to the types I have a semi complete set of.

By the way, you mentioned the three tooth saw blades, that is common on some Japanese saws. It is something of a combo saw.

Just if you come across them...

Thanks a lot.