New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Precision you can feel — woodworking perfected with Lee Valley

Interesting Chute Plane *LINK*

Posts

Interesting Chute Plane *LINK*

#1

Interesting Chute Plane *LINK*

Hank Knight

There's an interesting chute board place on Jim Bodie's old tool list today:

[URL=http://s50.photobucket.com/user/hankknight/media/imagejpg1_zps88d57f74.jpg.html][/URL]

At first, I thought the metal insert was a nicker and wondered why one would want a nicker on a chute plane. But it's not a nicker, it looks like a ware guard to protect the wooden body of the plane. The toe treatment is curious too. Does it serve a purpose, or is it purely ornamental?

More pics in the link below.


Chute Board Plane

Re: Interesting Chute Plane *LINK*

#2

Re: Interesting Chute Plane

david weaver

I don't believe that's a chute board plane. It wouldn't be necessary to run the iron all the way to the edge like a badger plane, and that metal is definitely a nicker.

Curious about why such a large badger type plane and why there are wear strips installed on the side, though.

I have zero chance of figuring out what it was actually used for.

Re: Interesting Chute Plane *LINK*

#3

Re: Interesting Chute Plane

Hank Knight

David,

I think you are right, it's probably not a chute board plane. I wondered about the iron extending to the edge of the sole, but I figured that the nicker/ware guard (whatever it is) could be set to hold the iron slightly off the board to keep it from planing away the reference edge. That seems like a lot of trouble to remedy a problem that doesn't exist eith a regular chute plane. Maybe Bode has mischaracterized this plane. It's still interesting, though.

Hank

Re: Interesting Chute Plane *LINK*

#4

Jim DeLaney, Austintown, Ohio

Re: Interesting Chute Plane

Jim DeLaney, Austintown, Ohio

The metal piece is definitely a nicker, and the front end treatment seems to be for gripping. Note the absence of a knob, or other gripping surface.

I'm wondering what the other wood-filled slots down the side are.

Re: Interesting Chute Plane *LINK*

#5

Re: Still Interesting...

david weaver

..I think it's even more interesting that it's apparently not a chute board plane, because we don't know *what* it really is.

I'm curious. It's got those proud strips on the side, but the screw is proud of those yet (which makes me wonder if it dried, or if they were proud - if they were, it certainly would've had to have fit on or in or against something that had relief for the screw heads).

I've never seen a plane set to cut to the edge that was that large. Someone intentionally made a big plane for a reason. It'd be interesting to find out what it was.

Re: Interesting Chute Plane *LINK*

#6

I'm Intrigued

Hank Knight

Hi, David,

I'm intrigued too. I don't think the screws on either the inserts or the nicker were meant to be proud of the body. If you can enlarge the photos on your computer, especially a couple of the photos on Bode's web site, the screws appear to be almost flush. The inside edges of the screw slot on the nicker have been relieved, chamfered actually, to accommodate the flat head screw. Perhaps the wood has shrunk, as you say, or the inlay strips may have worn away so the screws are no longer flush. It also occurred to me that the nicker may have been added later and was not part of the original plane. It looks a little crude while the rest of the plane is well crafted. Curious.

Hank

Re: Interesting Chute Plane *LINK*

#7

Re: Still Interesting...

Warren in Lancaster, PA

I think the plane was designed to cut wide cross grain rabbets. Hence the nicker and the skewed blade. Since there is no fence it would need a batten.

Bode called the inserts "intermittent boxing". A friend who collects 18th century Philadelphia planes told me that the boxing for some makers did not go the full length of the sole the way we often see today. The boxing was instead was inserted into maybe three mortises in the sole, not a continuous strip.

Re: Interesting Chute Plane *LINK*

#8

Re: Interesting Chute Plane

Lars Parrington

I'm guessing the other slots are alternate locations for the nicker. They are filled in with wood blanks to protect them and keep them from catching on anything. No idea why alternate nicker locations would be needed though.