New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Exotic Hardwood, Personally Sourced Worldwide. Inspected at Origin. Shop Rare Stock.

Hammer in hand now on line. *LINK*

Posts

Hammer in hand now on line. *LINK*

#1

Hammer in hand now on line. *LINK*

Kees

I got this from Joshua Klein's blog, The workbench diary. Very happy to read this book online. I have often seen this book mentioned, but never been able to read it.

Of course I had a quick look at the planes. Lots of single iron ones even a 60 degree smoother. There are a nice strikeblock and a tryplane with a double iron, the former from 1793. The jointer is very long at 33 1/2". The writer is surprised at that length, because the English literature suggest a maximum length of 30" (75 cm). But it is not difficult to find jointer planes of 90 cm (36") overhere in Holland. That would be more a carpenters tool I'd guess.

I'm going to study more.


http://digital.library.wisc.edu/1711.dl/DLDecArts.HammerInHand

Re: Hammer in hand now on line. *LINK*

#2

Re: Hammer in hand now on line.

Kees

Another little detail. The double iron bench planes are bedded at 40 degrees. The single iron ones mostly at 50 degrees.

Re: Hammer in hand now on line. *LINK*

#3

Re: Hammer in hand now on line. *LINK*

Warren in Lancaster, PA

Thanks Kees, a valuable resource. I have written about the Dominy planes on this forum, probably before you were active, Kees. The double irons show up in the account books around 1790, shortly after Nathaniel V returns from an outside apprenticeship. One of the smoothing planes is mislabelled at 30 degrees. One can see from the picture that this is not right and in any case would not be practical.

Here is one post about Dominy planes that I recall.


Dominy planes

Re: Hammer in hand now on line. *LINK*

#4

Re: Hammer in hand now on line. *LINK*

Kees

Here is another interesting article about an early double iron plane from London. Someone on the UKworkshop forum menioned it. the articel isn't very recent but I didn't know about it.

You can see an interesting devellopment of the double iron plane. The London one doesn't have a screw attaching the two irons at all. The Dominy strike block from 1793 has the screw on top, instead of the bottom like it became the norm later.


http://www.taths.org.uk/tools-and-trades/articles/56-an-early-cabinet-maker-s-smoothing-plane-from-the-city-of-london

Re: Hammer in hand now on line. *LINK*

#5

Loose double irons

Warren in Lancaster, PA

Thanks for this article, Kees. There was some documentation I was unaware of.

I have long thought that double irons were used loose for quite some time. When Carruthers advertised in 1767 double iron'd planes of a late construction, it certainly suggests that there had been an evolution of design and that the double iron concept itself was not new at that time. My feeling is that it could have been around for centuries but limited to specialty shops. It could date to Flanders 1650, or Florence 1550, or who knows.

There are old double iron rabbet planes around that have no screw between the irons. The screws added quite a bit to the cost of bench planes, but most liked them.

Re: Hammer in hand now on line. *LINK*

#6

Never liked...

david weaver

..trying to use, set and adjust planes that have loose double irons.

A couple of years ago, I thought the double iron was going to be the thing that saved my distaste for heavy smoother work with japanese planes, but the cap iron set changes with adjustment of the plane sometimes, which is a real annoyance.

I'd pay 10x as much for a cap iron and iron that are mated together with a screw as I would for an adjuster.

Re: Hammer in hand now on line. *LINK*

#7

Re: Hammer in hand now on line.

david weaver

It's interesting how that smoother is cut, with the abutment terminating in the mouth instead of the wear (though the article says both irons were fairly thin, so it wouldn't present as much of a large mouth as it would on many later irons).

Also interesting how short the wear is. The double iron planes that the chinese makers are still making now have a very short wear like that. Functionally, it makes no difference in a plane, though, we don't intend to flatten them very often, and I wouldn't want one with a tall wear that had a half inch of the bottom flattened off of it, anyway. Presume they did that with the early ones because the feeding issues are easier to solve, and opening the mouth is easier when the wear is short.

I've got a couple of Hildick marked irons, but they are later and solid steel. It wouldn't surprise me to find that a maker of all of these irons (the later ones) took a lot of the early marks and put them on their irons.

Re: Hammer in hand now on line. *LINK*

#8

Re: Loose double irons

Kees

Yes who knows?

If the "sign of the three plains" really shows us double iron tryplanes (like that article suggests), then that would be the oldest piece of documentation abou the double iron plane. But I am a bit doubtfull about that one. What looks like the capiron peering above the wedge could also be a more ornamental wedge with a round top. About 1732.


img

Re: Hammer in hand now on line. *LINK*

#9

Re: Hammer in hand now on line.

Kees

That plane from Londion seems to be totally worn out. They reckon it has lost about half an inch of its height. That might explain why the mouth is so wide, the wear is so low and the abbutments end up in the mouth. Remember this plane was found in the rubish tip, not in a tool cabinet!

Re: Hammer in hand now on line. *LINK*

#10

Re: Hammer in hand now on line.

Steve Voigt

Thanks for the link, Kees. My local library has this book and I've checked it out many times. But it's great to see it online, where it will hopefully be more widely read. There is a mountain of stuff to learn from it.