New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Fast and affordable laser cutting – so you can make the parts you can’t find anywhere else

Wedged M&T joint Chinese style

Posts

Wedged M&T joint Chinese style

#1

Chris Scholz

Wedged M&T joint Chinese style

Chris Scholz

First start with a board and rip a piece off with a big old framesaw. Flatten the board using a jack and a jointer plane

http://v.youku.com/v_show/id_XNTAyNTQ2MjAw.html

Finish squaring up the board and mark out the joints and cut mortices

http://v.youku.com/v_show/id_XNTAyNTQ2OTMy.html

More tenons, cut mortice assembly, finishing up with a smoothing plane, cutting wedges and wedging the joint.

http://v.youku.com/v_show/id_XNTAyNTQ3MTI0.html

Re: Wedged M&T joint Chinese style

#2

Re: Wedged M&T joint Chinese style

Larry Barrett

Chris

The third link seems to hangup just at the end of the initial countdown.

Re: Wedged M&T joint Chinese style

#3

Re: Wedged M&T joint Chinese style

Brian Holcombe

I like to watch this fellow work as it is interesting to see departures between how I am used to doing things and how someone who presumably makes a living with handtools is doing things.

Such as; I always cut wedges with a saw after some basic markings, I would never think to just split them off, but it makes perfect sense.

Re: Wedged M&T joint Chinese style

#4

Re: Wedged M&T joint Chinese style

Larry Barrett

Seems OK on IE, but problem on FF.

Re: Wedged M&T joint Chinese style

#5

Re: Wedged M&T joint Chinese style

Bruce, a MN Galoot

I love the bench stop he uses at about 8:20 into the third video.