New WoodChat!
Home Articles Forums Gallery Marketplace Videos

WoodCentral Forums

Knowledge You Can Build On — Est. 1998

Portable Sawmill & Tree Service – Abingdon, VA

Chinese bow/framesaw

Posts

Chinese bow/framesaw

#1

Chinese bow/framesaw

Chris

Shaping the frame (30 min)

http://v.youku.com/v_show/id_XNTQ2MDQ1MTUy.html

(I am getting a counter that counts down from 45 or so. Just wait until the countdown is done and the movie starts)

SWMBO dropped in for a few minutes, somewhere half way through the video Xin Sifu complains that he can't find any decent rasp any more so he has to use a course metal file.

somewhere he says he could use a bandsaw to cut out the frame, but since he only makes one saw, he is using hand tools.

Installing the blade and finishing the frame (30min)

http://v.youku.com/v_show/id_XNTQ2MDQ1MTky.html

It's crucial that the blade does not rotate easily, otherwise the saw is not useful.

Sharpening the blade and test cut (30 min)

http://v.youku.com/v_show/id_XNTQ1OTkwNzky.html

He says if all the teeth are the same that's not good (no explanation why, maybe that's similar to the difference between a hand-cut rasp and a machine cut rasp?). also the set pattern is pretty interesting, one left, skip one, one right, skip one...

Enjoy!

Chris

Re: Chinese bow/framesaw

#2

Re: Chinese bow/framesaw

TomD

Thanks for finding that, I am working my way through the videos.